clutch and trans info - Page 3

Rod Greene · 10-05-2017, 06:16 PM

Ram cleaning lady pressure plate, 3 pad disc, 30 lb wheel, and an 8 3/4. Can we say parts breaker?

Bob Gullett · 10-05-2017, 06:56 PM

Quote:

Originally Posted by rod greene

ram cleaning lady pressure plate, 3 pad disc, 30 lb wheel, and an 8 3/4. Can we say parts breaker?

lmao!

killintime6968 · 10-05-2017, 07:35 PM

LOL x 2. But I still have my Hays Mark 12 clutch , 30lb flywheel and Liberty shifted A833 trans out of my old modified car..

Bruce Cameron

james schaechter · 10-05-2017, 09:12 PM

Quote:

Originally Posted by Wade_Owens

Schaefer clutch and an A833. You're welcome.

Wade O

Wade, I think that comes with a tow strap as part of the installation kit! LOL

denbreeden · 10-05-2017, 09:16 PM

Quote:

Originally Posted by Bob Gullett

lmfao!

Already run a Dana, 8 3/4 won't hold up too long with an automatic let alone a stick.

Bob Gullett · 10-05-2017, 09:27 PM

Its the old saying. Your car is only as strong as the weakest link. I knew a few guys with an 8 3\4 that twisted the housing. As far as trans go I've always run a Jerico with an Advanced Clutch. After about 700 runs on the Jerico finally broke a shift finger. With my combo I would not hesitate to run a Jerico. But its also not an 800hp engine. A lot of people forget that if you have too aggressive of a clutch I don't care what trans you have the life expectancy is short.

randy wilson · 10-06-2017, 02:05 PM

Quote:

Originally Posted by denbreeden

Putting a stick in my Drag Pak this winter, who has the best clutch setup? Best transmission? Looking at G-Force for the transmission, any thoughts on this?

Dennis Breeden
FSS/K

I know of a brand new Youngblood dual clutch setup for sale now. Call 641-414-6016 ask for Steve. Also, not a thing wrong with the G-Force. Ran em for years. Own 3.

Dirk Olson · 10-06-2017, 03:15 PM

Quote:

Originally Posted by Rod Greene

Ram cleaning lady pressure plate, 3 pad disc, 30 lb wheel, and an 8 3/4. Can we say parts breaker?

"Older" guys will remember this "Clutch - Matics"

Dirk

Ernie Neal · 10-17-2017, 09:33 PM

Dennis, if you choose a liberty, I have a Browell aluminum bellhousing.

Ernie
SS 354

10-05-2017, 06:16 PM	#21
Rod Greene Senior Member Join Date: Mar 2002 Location: TN Posts: 530 Likes: 417 Liked 242 Times in 81 Posts	Re: clutch and trans info Ram cleaning lady pressure plate, 3 pad disc, 30 lb wheel, and an 8 3/4. Can we say parts breaker? __________________ Rod Greene Real men shift for them selves. Slowly working on TA Challenger for D,E/S and a 72 Challenger for SS/K, L as if I don't have enough other projects.

10-05-2017, 07:35 PM	#23
killintime6968 Member Join Date: Oct 2009 Location: Whitecourt,Alberta,Canada Posts: 236 Likes: 4,623 Liked 91 Times in 29 Posts	Re: clutch and trans info LOL x 2. But I still have my Hays Mark 12 clutch , 30lb flywheel and Liberty shifted A833 trans out of my old modified car.. Bruce Cameron

10-05-2017, 09:27 PM	#26
Bob Gullett VIP Member Join Date: Mar 2002 Posts: 1,103 Likes: 56 Liked 464 Times in 113 Posts	Re: clutch and trans info Its the old saying. Your car is only as strong as the weakest link. I knew a few guys with an 8 3\4 that twisted the housing. As far as trans go I've always run a Jerico with an Advanced Clutch. After about 700 runs on the Jerico finally broke a shift finger. With my combo I would not hesitate to run a Jerico. But its also not an 800hp engine. A lot of people forget that if you have too aggressive of a clutch I don't care what trans you have the life expectancy is short. __________________ 68 Chevy11 327 F/S Last edited by Bob Gullett; 10-06-2017 at 11:46 AM.

10-17-2017, 09:33 PM	#29
Ernie Neal Senior Member Join Date: Feb 2009 Location: Columbus, Indiana Posts: 529 Likes: 164 Liked 325 Times in 78 Posts	Re: clutch and trans info Dennis, if you choose a liberty, I have a Browell aluminum bellhousing. Ernie SS 354