big base circle cam in stock elem. - Page 7

Dave Noll · 12-25-2014, 02:14 AM

A 42/46 clevor in stock ???

Bill Diehl · 12-25-2014, 02:43 AM

Quote:

Originally Posted by Dave Noll

A 42/46 clevor in stock ???

I have a Cleveland block, the pic is just for reference.....as some of the folks just could not grasp what I was conveying...or they just pulling my chain

Jerry Davis · 12-25-2014, 08:53 AM

I would think moving or offsetting the lifter would be illegal in stock, if not the sbm's would have a lot to gain with the 59 degree lifter angle.
Jerry

Larry Hill · 12-25-2014, 08:57 AM

Quote:

Originally Posted by Bill Diehl

merry Christmas folks... 42/46

That looks like a pre 70's Buick block that had the crankcase breather at the rear of the block. I think the distributor went in the front cover on those engines.

Dwight Southerland · 12-25-2014, 10:13 AM

Quote:

Originally Posted by Bill Diehl

The rule book does not say you can have 3.5 or 4" wide front wheels....but everybody has them.

Really?

Stock Cars, Section 10A:5 Tires and Wheels
"Any wheel/tire combination may be used that does not require alterations to wheelwells."

Have you really read the rulebook??

Billy Nees · 12-25-2014, 10:24 AM

I'm sure that we can all remember our first time in "teardown". I was told by the Tech Inspector doing mine to just consider it my initiation into the game. I'd love to see a video of his!

Bill Diehl · 12-25-2014, 10:29 AM

Quote:

Originally Posted by Dwight Southerland

Really?

Stock Cars, Section 10A:5 Tires and Wheels
"Any wheel/tire combination may be used that does not require alterations to wheelwells."

Have you really read the rulebook??

yep...then I have no worries.

Stock Cars, Section 10A:1 Engine
"Cylinder blocks may be sleeved"

Ed Wright · 12-25-2014, 11:25 AM

[QUOTE=Dwight Southerland;456317]Really?

Stock Cars, Section 10A:5 Tires and Wheels
"Any wheel/tire combination may be used that does not require alterations to wheelwells."

Have you really read the rulebook??

I wrote about the same response, then thought "heck, if he can't read...." LOL

afdracing · 12-27-2014, 01:12 AM

I thought everyone going fast was running the new variable base circle cams? I'm not in the cam business but I think they call them the "Boomerang Stick"?

Welcome to the world of variable valve timing....

JHeath · 12-27-2014, 01:35 AM

Quote:

Originally Posted by Bill Diehl

You will see me this year

C/S and D/S Boss 351 Ford

I can hardly wait.

12-25-2014, 02:14 AM	#61
Dave Noll Senior Member Join Date: Nov 2007 Location: Div. 6, Eastern, WA Posts: 710 Likes: 2,673 Liked 240 Times in 112 Posts	Re: big base circle cam in stock elem. A 42/46 clevor in stock ??? __________________ Dave Noll, EF/S ,?/SA 6526

12-25-2014, 08:53 AM	#63
Jerry Davis Junior Member Join Date: Jun 2007 Posts: 52 Likes: 0 Liked 10 Times in 6 Posts	Re: big base circle cam in stock elem. I would think moving or offsetting the lifter would be illegal in stock, if not the sbm's would have a lot to gain with the 59 degree lifter angle. Jerry __________________ Jerry Davis 4168 STK

12-25-2014, 10:24 AM	#66
Billy Nees VIP Member Join Date: Oct 2002 Location: On a hilltop in Pa. Posts: 4,496 Likes: 3,600 Liked 7,768 Times in 1,741 Posts	Re: big base circle cam in stock elem. I'm sure that we can all remember our first time in "teardown". I was told by the Tech Inspector doing mine to just consider it my initiation into the game. I'd love to see a video of his! __________________ Billy Nees 1188 STK, SS I'm not spending 100K to win 2K

12-25-2014, 11:25 AM	#68
Ed Wright Veteran Member Join Date: Mar 2005 Location: Sand Springs, OK Posts: 8,132 Likes: 896 Liked 390 Times in 170 Posts	Re: big base circle cam in stock elem. [QUOTE=Dwight Southerland;456317]Really? Stock Cars, Section 10A:5 Tires and Wheels "Any wheel/tire combination may be used that does not require alterations to wheelwells." Have you really read the rulebook?? I wrote about the same response, then thought "heck, if he can't read...." LOL __________________ Ed Wright 4156 SS/JA

12-27-2014, 01:12 AM	#69
afdracing Junior Member Join Date: Dec 2014 Posts: 1 Likes: 0 Liked 0 Times in 0 Posts	Re: big base circle cam in stock elem. I thought everyone going fast was running the new variable base circle cams? I'm not in the cam business but I think they call them the "Boomerang Stick"? Welcome to the world of variable valve timing....