Who still grinds Stock Eliminator Camshafts? - Page 2

FrankChastain · 07-09-2012, 11:44 AM

Quote:

Originally Posted by BlueOval Ralph

He owns Hyper Tech the company Amy Faulk runs

Thanks....

Aubrey N Bruneau · 07-09-2012, 01:15 PM

Appears to be a well kept secret... Crane has hundreds of profiles, they're just not in any catalog. Ask for Bob Stratman.

Alan Roehrich · 07-09-2012, 07:10 PM

Only Billy Godbold at Comp Cams and Don Walthall at Bullet have actually done any recent design work on Stock Eliminator cams that I know of. I don't know that Crane or Lunati have any Stock Eliminator designs that are not quite a few years old.

There are some other people, both known and "unknown", doing some design work, including the designer at LSM, and a few others, mostly people who own their own company and their own design software.

The problem is that Stock Eliminator is a very small and well defined market, you're not going to see too many companies willing to invest in that market.

jmantle · 07-09-2012, 09:12 PM

If you run something oddball like I do, Bullet is probably your best bet. Non of the other guys seemed the least bit interested. The nice thing is the first cam they sent me worked.
Jim Mantle U/V/SA 6632

Lew Silverman · 07-09-2012, 09:53 PM

I spoke to Chris Padgett at CompCam and had no difficulty getting a cam that "works" in my 'wagon. He asked all the right questions. I would not hesitate to call him again if I needed another camshaft.

Lew

Alex Denysenko · 07-11-2012, 09:10 PM

Quote:

Originally Posted by Aubrey N Bruneau

Appears to be a well kept secret... Crane has hundreds of profiles, they're just not in any catalog. Ask for Bob Stratman.

ChaseKnight hasbeen with Crane almost as long as stock has been around. he knows his way around a s/ss grind or 2

Knight hasbeen with crane almost as long as stock has been around. he knows his way around a s/ss grind or 2

07-09-2012, 01:15 PM	#12
Aubrey N Bruneau Member Join Date: Sep 2003 Location: South Eastern Alberta, Canada Posts: 311 Likes: 6 Liked 7 Times in 3 Posts	Re: Who still grinds Stock Eliminator Camshafts? Appears to be a well kept secret... Crane has hundreds of profiles, they're just not in any catalog. Ask for Bob Stratman. __________________ Aubrey N Bruneau 6409 C/S 62 BelAir sport coupe, 409 HP 409

07-09-2012, 07:10 PM	#13
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,105 Likes: 1,561 Liked 1,788 Times in 408 Posts	Re: Who still grinds Stock Eliminator Camshafts? Only Billy Godbold at Comp Cams and Don Walthall at Bullet have actually done any recent design work on Stock Eliminator cams that I know of. I don't know that Crane or Lunati have any Stock Eliminator designs that are not quite a few years old. There are some other people, both known and "unknown", doing some design work, including the designer at LSM, and a few others, mostly people who own their own company and their own design software. The problem is that Stock Eliminator is a very small and well defined market, you're not going to see too many companies willing to invest in that market. __________________ Alan Roehrich 212A G/S Last edited by Alan Roehrich; 07-10-2012 at 01:57 AM.

07-09-2012, 09:12 PM	#14
jmantle Member Join Date: Feb 2008 Location: Black Creek, BC Canada Posts: 331 Likes: 78 Liked 172 Times in 81 Posts	Re: Who still grinds Stock Eliminator Camshafts? If you run something oddball like I do, Bullet is probably your best bet. Non of the other guys seemed the least bit interested. The nice thing is the first cam they sent me worked. Jim Mantle U/V/SA 6632

07-09-2012, 09:53 PM	#15
Lew Silverman VIP Member Join Date: Mar 2010 Location: Newport News, VA Posts: 1,435 Likes: 371 Liked 129 Times in 59 Posts	Re: Who still grinds Stock Eliminator Camshafts? I spoke to Chris Padgett at CompCam and had no difficulty getting a cam that "works" in my 'wagon. He asked all the right questions. I would not hesitate to call him again if I needed another camshaft. Lew __________________ Lew Silverman #2070 "The Wagon Master" N/SA