|
04-24-2011, 11:11 AM | #1 |
Junior Member
Join Date: Mar 2007
Posts: 91
Likes: 0
Liked 0 Times in 0 Posts
|
Front Disc brakes are a "drag".......
I'm running a first gen Camaro with Wilwood's up front. They have some drag to them. I thought about installing some kind of heavy return spring between the pads but I'm afraid that will retract the pads and make the pedal too soft.
Any suggestions how to cut down on the drag?
__________________
'67 Camaro 1.25 5.77 @ 118 |
04-24-2011, 11:20 AM | #2 |
VIP Member
Join Date: May 2006
Location: Louisville , KY
Posts: 1,995
Likes: 67
Liked 270 Times in 68 Posts
|
Re: Front Disc brakes are a "drag".......
There's something wrong if they have much or any drag.
__________________
Greg Hill 4171 STK |
04-24-2011, 11:26 AM | #3 |
VIP Member
Join Date: Dec 2001
Location: Texarkana Ark/TX
Posts: 2,399
Likes: 494
Liked 724 Times in 280 Posts
|
Re: Front Disc brakes are a "drag".......
40 Cpe
What master cyl. are you using? Some master cylinders have a pressure residual valve. If there is a residual pressure valve in it then remove it. They hold a slight amt. of pressure on the system that allows quicker pedal response and also causes drag. Same thing can happen with a stock proportion valve.
__________________
Adger Smith (Former SS) Last edited by Adger Smith; 04-24-2011 at 01:34 PM. Reason: SP |
04-24-2011, 01:02 PM | #4 |
Member
Join Date: Dec 2006
Location: Cocoa Florida
Posts: 200
Likes: 173
Liked 71 Times in 35 Posts
|
Re: Front Disc brakes are a "drag".......
The master cylinder is a good place to start looking . I also found the hoses going to the calipers and the one going to the rear end might look good on the outside but are plugged on the inside. We also changed the master cylinder and removed the stock proportation valve and replumbed the lines and that fixed our problem. I know this sounds like a lot of work but being able to stop on a short track is priceless. Kenney Kelley
Last edited by Kenney Kelley; 04-24-2011 at 01:05 PM. |
04-24-2011, 05:48 PM | #5 |
Junior Member
Join Date: Mar 2007
Posts: 91
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Front Disc brakes are a "drag".......
The MS is a GM unit for disc/drum. Might have to see about changing that out.
__________________
'67 Camaro 1.25 5.77 @ 118 |
04-24-2011, 05:54 PM | #6 |
Member
Join Date: Sep 2008
Posts: 216
Likes: 0
Liked 6 Times in 3 Posts
|
Re: Front Disc brakes are a "drag".......
i just removd the wilwood light weight front brake it out for the solid disc set between my chevelle and the 68 camaro i am working on. when i bled the the fronts the right side was sticking hard and the left side had a slight amount of drag. i just put a strange master cylinder and reinstalled the line lock and a couple of new russel braided lines at the caliper. this brake setup is only 2 seasons old, and i only run about 12-15 days at the track per season. i took the calipers apart tofind "pickup" on the pistons. there was a very small amount of wear showing through the black annodizing of the caliper piston bores, but no pickup. the pichup scores on the pistons polished off with ease. i put a small amount lubrication on the pistons before reinstall and they slide in very easy! put them back on and bled the system, they are working great right now, they back off perfect.
Ian |
05-06-2012, 08:44 PM | #7 |
Junior Member
Join Date: Mar 2007
Posts: 91
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Front Disc brakes are a "drag".......
Just an update. I changed out the "square" o-rings in the calipers and went to the "round" style and the front wheels make severals turns before stopping now.
__________________
'67 Camaro 1.25 5.77 @ 118 |
05-06-2012, 10:40 PM | #8 |
Member
Join Date: Dec 2009
Location: Minnesota
Posts: 186
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Front Disc brakes are a "drag".......
|
05-08-2012, 10:14 AM | #9 |
Senior Member
Join Date: Jun 2008
Location: nhranumbers.com
Posts: 871
Likes: 131
Liked 151 Times in 48 Posts
|
Re: Front Disc brakes are a "drag".......
I have a strange assembly on my car and they seem to drag a bit.
Is this wrong? |
05-23-2012, 03:30 PM | #10 |
Senior Member
Join Date: Jun 2008
Location: nhranumbers.com
Posts: 871
Likes: 131
Liked 151 Times in 48 Posts
|
Re: Front Disc brakes are a "drag".......
|
|
|