|
|
10-01-2010, 07:29 PM
|
#1 |
|
Junior Member
Join Date: Nov 2001
Location: malden ma
Posts: 69
Likes: 0
Liked 0 Times in 0 Posts
|
moroso front springs?
time for some new front springs. i would like to know should you go by only the front weight or do you use the part number for your car and cut to adjust?..
some say just use the part number and let is sit...last time it never settled..had to remove 3/4 of a coil...whats say you's? tks for your time jeff |
|
|
|
10-01-2010, 07:48 PM
|
#2 |
|
Member
Join Date: Dec 2001
Location: Hanover, MA
Posts: 430
Likes: 3
Liked 1 Time in 1 Post
|
Re: moroso front springs?
Jeff cut 1 coil off the Morosos and it'll sit right.
__________________
Doug Blackley 1697 STK |
|
|
|
|
10-01-2010, 09:18 PM
|
#3 |
|
Member
Join Date: Apr 2005
Location: Bethany La.
Posts: 322
Likes: 96
Liked 169 Times in 53 Posts
|
Re: moroso front springs?
Jeff: I just got a new set of the Moroso front springs for my Nova
 71 SB car) . I ordered them by the front end weight of the car. Drivers side was just right; passengers side needed a 1/4 coil cut off. The stance of the car really depends on how much rear preload, if any, you run on your car. Hope this helps.
__________________
Bill Bogues 4696 STK |
|
|
|
|
10-01-2010, 10:14 PM
|
#4 |
|
Junior Member
Join Date: Nov 2008
Location: Republic,Mo
Posts: 93
Likes: 0
Liked 0 Times in 0 Posts
|
Re: moroso front springs?
Don't cut them, if anything get a lighter spring and use spacers to get ride height. Thats what the guys at www.santhuffshocks.com say
__________________
*** 72 Malibu *** 1.329-3.99-6.28@106.71-9.98@131 best 60ft to date-1.2997 |
|
|
|
|
10-02-2010, 02:36 PM
|
#5 |
|
Member
Join Date: Jun 2007
Location: St. Augustine, Fla.
Posts: 229
Likes: 561
Liked 39 Times in 9 Posts
|
Re: moroso front springs?
Like doug says, one coil on the moroso springs for the 3rd gen cars.
__________________
Reggie Winkles 2650/Stock |
|
|
|
 |
|
|
Linear Mode
