Super Stock Head Preparation

GTX JOHN · 01-23-2010, 12:45 AM

Looking for suggestions for someone to do a set of small block mopar heads for the kid's new car. I left a set in Palmdale for two years only to have the gentleman tell me he would not have time to work on them. My friends that work on the stockers for me, say it is too time consuming for them! Called Heads Up (only SS Head guy I know) several times but he was to busy to either talk to me or call me. I have an old beat up set of Studley Heads that have been patched together bu that scare me to death.. a PM or E mail Racer7411@yahoo.com if you

want to reply that way better.

340Cuda · 01-23-2010, 08:14 AM

You might give Jim Lewis in Vian OK a call.
Good Luck,
Bill

http://jimlewisraceengines-cylinderh...stingprod.com/

RJ · 01-23-2010, 09:10 AM

Call Lew Linebarrier at Competition Induction Service - (828)635-7492, current record holding iron small block mopar super stock heads.

Jim Storms · 01-23-2010, 04:54 PM

What year and combo are you looking at. i have a set of heads an intake.. 308 heads and Port-O-Sonic intake. also rocker stands & T&D rockers.

Jeff Teuton · 01-23-2010, 05:25 PM

GTX John, you have a pm

GTX JOHN · 01-23-2010, 05:28 PM

Jim, PM me a way to reach you.

Phillip marvetz · 01-24-2010, 02:54 AM

I have a nice set of small valve heads with t&d rockers if you need them John. They need springs and new shafts.

Rod Greene · 01-26-2010, 05:22 PM

Modern Machine did heads for Etter and Taylor. John you should have a several sets of 308's in your stash. Send them out and have them done with current technology.

Jim Storms · 01-26-2010, 07:17 PM

Rod...Are you saying the heads that i have are not up to 2010 standards???? I do know these heads are legal and have passed a teardown...!

7423 · 01-26-2010, 09:37 PM

Call Greg Luneack, Tri City Comp, one of our guys who does very good work

01-23-2010, 12:45 AM	#1
GTX JOHN VIP Member Join Date: Jun 2009 Location: Boulder City, Nevada 89005 Posts: 2,719 Likes: 2,766 Liked 2,425 Times in 687 Posts	Super Stock Head Preparation Looking for suggestions for someone to do a set of small block mopar heads for the kid's new car. I left a set in Palmdale for two years only to have the gentleman tell me he would not have time to work on them. My friends that work on the stockers for me, say it is too time consuming for them! Called Heads Up (only SS Head guy I know) several times but he was to busy to either talk to me or call me. I have an old beat up set of Studley Heads that have been patched together bu that scare me to death.. a PM or E mail Racer7411@yahoo.com if you want to reply that way better.

01-23-2010, 08:14 AM	#2
340Cuda VIP Member Join Date: Apr 2003 Location: Tulsa, Oklahoma Posts: 1,657 Likes: 3,797 Liked 758 Times in 329 Posts	Re: Super Stock Head Preparation You might give Jim Lewis in Vian OK a call. Good Luck, Bill http://jimlewisraceengines-cylinderh...stingprod.com/

01-23-2010, 09:10 AM	#3
RJ Member Join Date: Oct 2002 Posts: 248 Likes: 0 Liked 0 Times in 0 Posts	Re: Super Stock Head Preparation Call Lew Linebarrier at Competition Induction Service - (828)635-7492, current record holding iron small block mopar super stock heads. Last edited by RJ; 01-23-2010 at 09:12 AM.

01-23-2010, 04:54 PM	#4
Jim Storms Member Join Date: Aug 2005 Location: Renton, Washington Posts: 320 Likes: 0 Liked 4 Times in 2 Posts	Re: Super Stock Head Preparation What year and combo are you looking at. i have a set of heads an intake.. 308 heads and Port-O-Sonic intake. also rocker stands & T&D rockers.

01-23-2010, 05:25 PM	#5
Jeff Teuton VIP Member Join Date: Jan 2002 Location: Houma, LA Posts: 2,717 Likes: 2 Liked 325 Times in 50 Posts	Re: Super Stock Head Preparation GTX John, you have a pm __________________ Jeff Teuton 4022 STK

01-23-2010, 05:28 PM	#6
GTX JOHN VIP Member Join Date: Jun 2009 Location: Boulder City, Nevada 89005 Posts: 2,719 Likes: 2,766 Liked 2,425 Times in 687 Posts	Re: Super Stock Head Preparation Jim, PM me a way to reach you.

01-24-2010, 02:54 AM	#7
Phillip marvetz Senior Member Join Date: Oct 2008 Location: Lynden ,WA Posts: 820 Likes: 0 Liked 3 Times in 3 Posts	Re: Super Stock Head Preparation I have a nice set of small valve heads with t&d rockers if you need them John. They need springs and new shafts.

01-26-2010, 05:22 PM	#8
Rod Greene Senior Member Join Date: Mar 2002 Location: TN Posts: 530 Likes: 414 Liked 242 Times in 81 Posts	Re: Super Stock Head Preparation Modern Machine did heads for Etter and Taylor. John you should have a several sets of 308's in your stash. Send them out and have them done with current technology. __________________ Rod Greene Real men shift for them selves. Slowly working on TA Challenger for D,E/S and a 72 Challenger for SS/K, L as if I don't have enough other projects. Last edited by Rod Greene; 01-26-2010 at 05:27 PM.

01-26-2010, 07:17 PM	#9
Jim Storms Member Join Date: Aug 2005 Location: Renton, Washington Posts: 320 Likes: 0 Liked 4 Times in 2 Posts	Re: Super Stock Head Preparation Rod...Are you saying the heads that i have are not up to 2010 standards???? I do know these heads are legal and have passed a teardown...!

01-26-2010, 09:37 PM	#10
7423 Senior Member Join Date: Dec 2006 Posts: 639 Likes: 0 Liked 1 Time in 1 Post	Re: Super Stock Head Preparation Call Greg Luneack, Tri City Comp, one of our guys who does very good work