|
![]() |
#1 |
Senior Member
Join Date: Apr 2008
Posts: 872
Likes: 1
Liked 502 Times in 130 Posts
|
![]()
Anyone run all three of these oil back to back? Or any of them?
I did go from Mobil one 5w-20 to redline 20W both sythetics, Since I changed the rear tire pressure so I don't have any real data. Mobil One to Red Line oil pressure went up quite a bit. Poor data for the rest of it, this in the roller cam stocker. I think it was faster, could have been my wallet wishing it so. Switched to 30 weight red line for the challenger to capture the zinc from 10-30 penzoil, since this is a flat tappet cam. Not sure if it is quicker, feel better with the zinc. Mobil one though I know is real low on the zinc like all the street oils now. Valvoline synthetic versus redline? Got the coupon in the mail like many. 12 bucks off a case. Eric
__________________
Eric Merryfield 1883 STK |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Aug 2004
Posts: 674
Likes: 15
Liked 584 Times in 94 Posts
|
![]()
Eric, I know lots of guys run Break In Oil then switch to synthetics, and see huge increases in HP on the dyno and at the track. We went one step further, and back to backed, same weight synthetic oils of several different top brands on the dyno. Our results were Eye Opening. There's a BIG difference in Oils today !
|
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Aug 2004
Location: Jacksonville, Florida
Posts: 808
Likes: 7
Liked 20 Times in 12 Posts
|
![]()
Jim,
What was your results? You can PM me if you want. |
![]() |
![]() |
![]() |
#4 |
Member
Join Date: Sep 2009
Posts: 148
Likes: 1
Liked 1 Time in 1 Post
|
![]()
Jim,
I'm curious as to the results too.... |
![]() |
![]() |
![]() |
#5 |
VIP Member
|
![]()
Jim,
I hope you'll pm me as well, cos me three on liking to know the results. I've been using Castrol Syntec 5w30, but if something out there's better I'll thank you for the tip...
__________________
Gary Hampton '86 Z24,173 V6 CF/S #5824 (#78 in 2021) |
![]() |
![]() |
![]() |
#6 |
Member
Join Date: Jun 2005
Location: Gary, IN
Posts: 139
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
Jim,
I would appreciate your data as well.... I'm currently running Royal Purple 10W-40 synthetic, and I have Mobil 1 0W-30 and Penzoil 5W-40 in the garage. Please send me your results (you can PM me if you like). Thanx, Marvin
__________________
Marvin Robinson 3188 STK/SS |
![]() |
![]() |
![]() |
#7 |
Junior Member
Join Date: Feb 2008
Posts: 47
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
You people are so funny.
If you just read the advertisements they will tell you which one is best!! Not |
![]() |
![]() |
![]() |
#8 |
Senior Member
Join Date: Jul 2007
Location: East China, MI
Posts: 504
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
Yeah, especially the one with liquid ball bearings!!!!
I would also like a copy of your results if you wouldn't mind. I am so unsure of what type of oil we should be using. We are currently using Mobil 1 0W-30. Since Mobil 1 has a low zinc/phosphorus content, do you guys think I should be using a zinc/phosphorus additive?
__________________
Nelson Kowal Stock 345 |
![]() |
![]() |
![]() |
#9 | |
Senior Member
Join Date: Apr 2008
Posts: 872
Likes: 1
Liked 502 Times in 130 Posts
|
![]() Quote:
Eric
__________________
Eric Merryfield 1883 STK |
|
![]() |
![]() |
![]() |
#10 |
Banned
Join Date: Mar 2002
Posts: 310
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
evveryone likes a free speed secret...i guess he is flooded with PM's and mails by now..
|
![]() |
![]() |
![]() |
|
|