Mad box

jamie2370 · 06-10-2019, 06:13 PM

Experiencing a problem where car wont pull over about 5500rpm. Lays over and starts busting up, lol. 7al2 box, took out rpm chip, no help. New cap rotor and pickup but didnt see anything wrong with any of it. Msd dist is not locked out. Goes to 38 degrees by 2500. Its not fuel or carb. Tried different carbs to no avail. Think I have a ignition box issue. Big question is if I get a new one I want to be able to use it with a holley fuel injection system. Recommendations?

Bob Shaw · 06-10-2019, 07:00 PM

My car was running exactly like that. It was a loose ground to the fuel pump relay.

jamie2370 · 06-10-2019, 08:06 PM

I just realized title said mad box ....bahahahah

terry1 · 06-11-2019, 07:14 AM

"jamie2370", keep in mind that your "Mad box" box draws one amp
of current for every 1000 RPM.
Take a close look at your electrical regarding the "Box".
Terry K

Patric Fox · 06-13-2019, 09:03 AM

Had a issue very similar to yours, seemed worse under a load, driving down the track. The gear on the end of the distributor was worn bad. Installed a new gear and problem was eliminated.

340Cuda · 06-13-2019, 09:31 AM

You are just Mad because sometimes the boxes Make Sparks Disappear.

On a more serious side the local speed shop here has a device they can test them with, however and see if they at least throw a spark.

Sometimes you have to just replace the box to know for sure. If it was not the box you at least have a spare going forward.

My son had one of the 6 series (I think) analog units. I swear in the MSD trailer you could have welded with the thing. Twice they said nothing was wrong with it. It had a slight high rpm miss. However you could replace the box and the miss would go away, put the box back in and the miss would return.

06-10-2019, 06:13 PM	#1
jamie2370 Member Join Date: Dec 2014 Location: Perry, GA Posts: 331 Likes: 11 Liked 239 Times in 90 Posts	Mad box Experiencing a problem where car wont pull over about 5500rpm. Lays over and starts busting up, lol. 7al2 box, took out rpm chip, no help. New cap rotor and pickup but didnt see anything wrong with any of it. Msd dist is not locked out. Goes to 38 degrees by 2500. Its not fuel or carb. Tried different carbs to no avail. Think I have a ignition box issue. Big question is if I get a new one I want to be able to use it with a holley fuel injection system. Recommendations?

06-10-2019, 07:00 PM	#2
Bob Shaw Member Join Date: Jan 2002 Location: Sedalia, Mo Posts: 436 Likes: 320 Liked 314 Times in 61 Posts	Re: Mad box My car was running exactly like that. It was a loose ground to the fuel pump relay. __________________ Bob Shaw V/SA 515

06-10-2019, 08:06 PM	#3
jamie2370 Member Join Date: Dec 2014 Location: Perry, GA Posts: 331 Likes: 11 Liked 239 Times in 90 Posts	Re: Msd box I just realized title said mad box ....bahahahah

06-11-2019, 07:14 AM	#4
terry1 Member Join Date: Sep 2006 Location: Moncton, N.B. Posts: 276 Likes: 24 Liked 24 Times in 13 Posts	Re: Mad box "jamie2370", keep in mind that your "Mad box" box draws one amp of current for every 1000 RPM. Take a close look at your electrical regarding the "Box". Terry K

06-13-2019, 09:03 AM	#5
Patric Fox Member Join Date: Jul 2007 Location: Pottstown,Pa. Posts: 121 Likes: 24 Liked 11 Times in 8 Posts	Re: Mad box Had a issue very similar to yours, seemed worse under a load, driving down the track. The gear on the end of the distributor was worn bad. Installed a new gear and problem was eliminated.

06-13-2019, 09:31 AM	#6
340Cuda VIP Member Join Date: Apr 2003 Location: Tulsa, Oklahoma Posts: 1,668 Likes: 3,844 Liked 793 Times in 336 Posts	Re: Mad box You are just Mad because sometimes the boxes Make Sparks Disappear. On a more serious side the local speed shop here has a device they can test them with, however and see if they at least throw a spark. Sometimes you have to just replace the box to know for sure. If it was not the box you at least have a spare going forward. My son had one of the 6 series (I think) analog units. I swear in the MSD trailer you could have welded with the thing. Twice they said nothing was wrong with it. It had a slight high rpm miss. However you could replace the box and the miss would go away, put the box back in and the miss would return.