|
|
![]() |
#1 |
Junior Member
Join Date: Jul 2010
Posts: 12
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
I am thinking of buying a Chiller for my car. What are the best options, brands, types you all have ran into? Thanks
|
![]() |
![]() |
![]() |
#2 |
VIP Member
Join Date: Jun 2006
Posts: 3,416
Likes: 522
Liked 330 Times in 178 Posts
|
![]()
for what a chiller costs you can make your own i chiller in a few hours that will do the job for hundreds of dollars less--we did probably saved near a thousand dollars-- IT WORKS!!!!
|
![]() |
![]() |
![]() |
#3 |
Member
Join Date: Oct 2004
Location: Littlestown PA
Posts: 163
Likes: 9
Liked 4 Times in 1 Post
|
![]()
I would think making your own wouldn't be that hard. Assuming the car already has an electric pump, get a big enough cooler, drill 2 holes, run 2 lines back and forth in cooler, fill with dry ice, hook up to car, turn on electric pump and BAM, got yourself a much cheaper cooler. Bolt on wheels or mount it in a custom cabinet on wheels that doubles as a toolbox/small workbench that can be rolled around in dirt, grass, on blacktop, anywhere you need it to go. Also, if you can weld aluminum, you can make your own. Possibility to use a motorhome/travel trailer fresh water tank mounted under trailer with access hole to fill with dry ice or bag ice from the track. I would run lines in it, access in trap door in trailer. When done, empty tank, no major added weight other than tank and lines, and I'm sure there is a tank built to fit under enclosed trailers to be used for that. I might be overthinking this but there are probably dozens of ways to do something yourself.
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Mar 2006
Posts: 977
Likes: 792
Liked 275 Times in 76 Posts
|
![]()
There are two types of chillers. One that is mechanical and one that uses ice or dry ice. Technically in my world a chiller is a mechanical device. If you are thinking of buying a refrigeration chiller make sure you have the power capacity from your generator or you have wasted your time and money.
For an ice bath style a large quality cooler, fittings, circ pump and hose and you are in business. The quick connect fittings are a small fortune, but worth the cost in the long run. As Rick pointed out having quality wheels and tires make maneuvering a chiller around is important. I made my chiller and also have a 15 gallon cooler that sits on top of the chiller. The more water capacity you have allows for quicker recovery on chilling the water back down. Sean
__________________
Sean Marconette 84 Mustang 5060 SS/N |
![]() |
![]() |
![]() |
#5 |
VIP Member
Join Date: Feb 2014
Location: Lakewood Washington
Posts: 1,407
Likes: 29
Liked 237 Times in 126 Posts
|
![]()
I saw a unit like Rick described in use at the Northwest Nationals and it just seemed so simple. A cooler full of ice with a bypass hose from the radiator running through it. You can get quick connect radiator bypasses on-line.
Dale
__________________
Dale Shearon 68 Mustang 6394 |
![]() |
![]() |
![]() |
#6 |
VIP Member
Join Date: Jul 2002
Location: Michigan
Posts: 1,227
Likes: 133
Liked 530 Times in 108 Posts
|
![]()
Here's a link to a story I wrote about building your own "chiller".
http://www.laneautomotive.com/lanemo...ownEffect.html
__________________
Jim Kaekel 3836 STK |
![]() |
![]() |
![]() |
#7 |
VIP Member
Join Date: Feb 2004
Location: LONG ISLAND N.Y.
Posts: 1,672
Likes: 3,359
Liked 1,804 Times in 422 Posts
|
![]()
If you are going to Indy I can build you one CHEAP..Or come by and see it James.
__________________
james perrone 1290 STK |
![]() |
![]() |
![]() |
#8 |
Veteran Member
Join Date: Mar 2005
Location: Sand Springs, OK
Posts: 8,132
Likes: 896
Liked 390 Times in 170 Posts
|
![]()
Unless you want to lug a generator to the back if the staging lanes, you can use a 12 volt utility pump from Harbor Freight in your ice chest style "chiller". Comes with garden hose fittings on both sides. Comes with alligator clips on the wires, so you can just clamp onto a 12 volt battery to run it. Some guys build a sheet metal box for a small battery, and mount it to the side of the ice chest. Most use clear hose to see the water flowing. Push on hose fittings are at Lowes Home Centers and Ace Hardware. Cheap and easy to build. I found my plastic ice chest, which has wheels on one end & a raise-up handle on the other, at Dollar General.
__________________
Ed Wright 4156 SS/JA |
![]() |
![]() |
![]() |
|
|