12 bolt yoke

Ron Gusack · 04-26-2012, 08:47 AM

Can you tell me what needs to be done to a 12 bolt OEM yoke to put a logger sensor on it?

440lebaron · 04-26-2012, 10:18 AM

i think the only tone ring you can buy are for 9", i glued my magnets to the ujoint caps

Dion Hildebrandt · 04-26-2012, 10:35 AM

Get a mark williams yoke.....joking.On the stock one I removed the dust ring in front of the seal and had to do some minor grinding ,computech had the appropriate sensor ring and your off to the races

Ron Gusack · 04-26-2012, 12:38 PM

Thanks for the info, I have a ring from Racepak and I would like to not have to take the yoke off the rear to install it.

Dion Hildebrandt · 04-26-2012, 02:06 PM

if your careful you can do the modification to the yoke on the car ,I did it on the car for the same reasons

Ron Gusack · 04-26-2012, 04:21 PM

What did you use to grind? A sharp flat file, Dremel, or a die grinder maybe? I'm thinking I have to pretty precise to keep the collar true.

04-26-2012, 08:47 AM	#1
Ron Gusack Member Join Date: Feb 2009 Posts: 244 Likes: 1 Liked 7 Times in 6 Posts	12 bolt yoke Can you tell me what needs to be done to a 12 bolt OEM yoke to put a logger sensor on it?

04-26-2012, 10:18 AM	#2
440lebaron Junior Member Join Date: Feb 2012 Location: westerly ri Posts: 13 Likes: 0 Liked 0 Times in 0 Posts	Re: 12 bolt yoke i think the only tone ring you can buy are for 9", i glued my magnets to the ujoint caps

04-26-2012, 10:35 AM	#3
Dion Hildebrandt Member Join Date: Nov 2008 Location: calgary alberta canada Posts: 383 Likes: 0 Liked 0 Times in 0 Posts	Re: 12 bolt yoke Get a mark williams yoke.....joking.On the stock one I removed the dust ring in front of the seal and had to do some minor grinding ,computech had the appropriate sensor ring and your off to the races __________________ Dion Hildebrandt 6009 STK H/SA

04-26-2012, 12:38 PM	#4
Ron Gusack Member Join Date: Feb 2009 Posts: 244 Likes: 1 Liked 7 Times in 6 Posts	Re: 12 bolt yoke Thanks for the info, I have a ring from Racepak and I would like to not have to take the yoke off the rear to install it.

04-26-2012, 02:06 PM	#5
Dion Hildebrandt Member Join Date: Nov 2008 Location: calgary alberta canada Posts: 383 Likes: 0 Liked 0 Times in 0 Posts	Re: 12 bolt yoke if your careful you can do the modification to the yoke on the car ,I did it on the car for the same reasons __________________ Dion Hildebrandt 6009 STK H/SA

04-26-2012, 04:21 PM	#6
Ron Gusack Member Join Date: Feb 2009 Posts: 244 Likes: 1 Liked 7 Times in 6 Posts	Re: 12 bolt yoke What did you use to grind? A sharp flat file, Dremel, or a die grinder maybe? I'm thinking I have to pretty precise to keep the collar true.