Ultimate wheelie bars!

Jeff Lee · 08-13-2010, 12:29 AM

http://www.jerrybickel.com/wheelie-b...mm-cwb-72.html

Yes, you can be the first S/SS'er to have these units! Click on the link then each picture.

Ed Carpenter · 08-13-2010, 07:37 AM

Only 5000.00 I'm sure you can afford it Jeff!!!!!!!!!

PB Candies · 08-13-2010, 10:47 AM

Don Ness came up with the concept and is building them.

Mark Markow · 08-13-2010, 10:56 AM

there breaking already. an outlaw 10.5 turbo car broke a set recently. i guess the glue joint failed. becuase the anodizing was not cleaned off the aluminum before the glue was applied. from what i have read they are still in the developement stages. and the tire shake that caused them to break , would have broken a steel bar also.

Jeff Lee · 08-13-2010, 10:59 AM

Well....good thing I didn't buy them!

SSDiv6 · 08-13-2010, 02:37 PM

Quote:

Originally Posted by Mark Markow

there breaking already. an outlaw 10.5 turbo car broke a set recently. i guess the glue joint failed. becuase the anodizing was not cleaned off the aluminum before the glue was applied. from what i have read they are still in the developement stages. and the tire shake that caused them to break , would have broken a steel bar also.

Glue?

I hope the metal parts in contact with the Carbon Fiber rods are not made of steel or Aluminum. If they are installing the Carbon Fiber rods on either steel or aluminum without any protection such as a primer or coating, the metal parts will eventually experience corrosion unless they are made of Titanium.

TOSTO RACING · 08-14-2010, 01:32 PM

I can replace alot of bumper covers for $5000.00 lol.

Darrin Christen · 08-13-2010, 12:42 PM

Quote:

Originally Posted by PB Candies

Don Ness came up with the concept and is building them.

Thinking about a set for that animal you have?

08-13-2010, 12:29 AM	#1
Jeff Lee VIP Member Join Date: Jul 2007 Location: Anthem, Arizona Posts: 2,766 Likes: 0 Liked 3 Times in 3 Posts	Ultimate wheelie bars! http://www.jerrybickel.com/wheelie-b...mm-cwb-72.html Yes, you can be the first S/SS'er to have these units! Click on the link then each picture. __________________ Jeff Lee 7494 D/S '70 AMX

08-13-2010, 07:37 AM	#2
Ed Carpenter Live Reporter Join Date: May 2006 Location: Dripping Springs, Tx Posts: 2,709 Likes: 186 Liked 520 Times in 132 Posts	Re: Ultimate wheelie bars! Only 5000.00 I'm sure you can afford it Jeff!!!!!!!!! __________________ Ed Carpenter 2005 Chevy Cobalt A/SM Race Engine Development

08-13-2010, 10:47 AM	#3
PB Candies Junior Member Join Date: Oct 2009 Posts: 87 Likes: 0 Liked 0 Times in 0 Posts	Re: Ultimate wheelie bars! Don Ness came up with the concept and is building them.

08-13-2010, 10:56 AM	#4
Mark Markow Senior Member Join Date: Apr 2008 Location: east hartford ct. Posts: 539 Likes: 0 Liked 9 Times in 3 Posts	Re: Ultimate wheelie bars! there breaking already. an outlaw 10.5 turbo car broke a set recently. i guess the glue joint failed. becuase the anodizing was not cleaned off the aluminum before the glue was applied. from what i have read they are still in the developement stages. and the tire shake that caused them to break , would have broken a steel bar also. __________________ Mark Markow 171 ss/tb

08-13-2010, 10:59 AM	#5
Jeff Lee VIP Member Join Date: Jul 2007 Location: Anthem, Arizona Posts: 2,766 Likes: 0 Liked 3 Times in 3 Posts	Re: Ultimate wheelie bars! Well....good thing I didn't buy them! __________________ Jeff Lee 7494 D/S '70 AMX

08-14-2010, 01:32 PM	#7
TOSTO RACING Senior Member Join Date: May 2007 Location: DRAGSTRIP Posts: 882 Likes: 857 Liked 629 Times in 180 Posts	Re: Ultimate wheelie bars! I can replace alot of bumper covers for $5000.00 lol. __________________ 5664 GHI/SA 1985 CAMARO RED H/SA 1985 CAMARO BLUE I/SA