Pinto Spindles

Caperat · 08-22-2009, 08:16 PM

Does anyone have for sale or know where to buy Pinto spindles for a 1970, 71,72, or 73 model? I was told that they changed in the 1974 model. ---- Thanks

ray sowers · 08-22-2009, 10:45 PM

Quote:

Originally Posted by Caperat

Does anyone have for sale or know where to buy Pinto spindles for a 1970, 71,72, or 73 model? I was told that they changed in the 1974 model. ---- Thanks

I have a set of stock Pinto spindles, calipers, rotors, I found a wrecked Pinto in a junk yard that had been rear ended with heavy damage. The rotors and calipers were new and were still clean.
The Pinto was one of the earlier ones before 1974, we have an old Jegster Pinto front end unit and I bought the parts for it some time ago and dont think we will use it.

Tom keedle · 08-23-2009, 08:13 AM

Quote:

Originally Posted by Caperat

Does anyone have for sale or know where to buy Pinto spindles for a 1970, 71,72, or 73 model? I was told that they changed in the 1974 model. ---- Thanks

70-72 are the same, 73-80 are different...

Jeff Kempton · 08-24-2009, 06:24 AM

I ran into this same problem a few years back. Does anyone know if the later control arms and/or spindles will bolt on to the earlier crossmember, or is everything about them different? If the later ones will bolt on, then availability isn't an issue. I'm guessing it's not that simple?

Tom keedle · 08-24-2009, 06:35 AM

Quote:

Originally Posted by Jeff Kempton

I ran into this same problem a few years back. Does anyone know if the later control arms and/or spindles will bolt on to the earlier crossmember, or is everything about them different? If the later ones will bolt on, then availability isn't an issue. I'm guessing it's not that simple?

if some pics of the later pinto/MII stuff would help, i can shoot some of the stuff i put under one of my americans....
i DON'T thing any of it is interchangable, though...

Caperat · 08-24-2009, 11:07 AM

Thanks guys. Is it possible Ray that you could check to see if they are off a 70 to 72 model as a friend of mine would like to buy them. Thanks

ray sowers · 08-25-2009, 11:04 PM

Quote:

Originally Posted by Caperat

Thanks guys. Is it possible Ray that you could check to see if they are off a 70 to 72 model as a friend of mine would like to buy them. Thanks

As best I remember the parts were off a 1970 to 1972 Pinto. I will have to go to my pole barn to check it out. I also have the four a-arms, upper and lower along with the original early rack and pinion unit.
I also have a later model Pinto rack and pinion unit, probably 1973/1974, Ray.

08-22-2009, 08:16 PM	#1
Caperat Junior Member Join Date: Jun 2006 Location: CANADA Posts: 76 Likes: 0 Liked 0 Times in 0 Posts	Pinto Spindles Does anyone have for sale or know where to buy Pinto spindles for a 1970, 71,72, or 73 model? I was told that they changed in the 1974 model. ---- Thanks

08-24-2009, 06:24 AM	#4
Jeff Kempton Member Join Date: Apr 2004 Location: Halifax, Nova Scotia, Canada Posts: 234 Likes: 1,043 Liked 66 Times in 30 Posts	Re: Pinto Spindles I ran into this same problem a few years back. Does anyone know if the later control arms and/or spindles will bolt on to the earlier crossmember, or is everything about them different? If the later ones will bolt on, then availability isn't an issue. I'm guessing it's not that simple?

08-24-2009, 11:07 AM	#6
Caperat Junior Member Join Date: Jun 2006 Location: CANADA Posts: 76 Likes: 0 Liked 0 Times in 0 Posts	Re: Pinto Spindles Thanks guys. Is it possible Ray that you could check to see if they are off a 70 to 72 model as a friend of mine would like to buy them. Thanks