|
|
![]() |
#1 |
Member
Join Date: Mar 2008
Posts: 201
Likes: 22
Liked 507 Times in 35 Posts
|
![]()
I was wanting the contact information for the adjustable brake pressure launch control with the brake pressure gauge.
Thanks Darcy Clarke Stk 6254 A/SA, F/SA, G/SA, H/SA |
![]() |
![]() |
![]() |
#2 |
Member
Join Date: Mar 2008
Location: Jerome, Michigan
Posts: 119
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
I use a GEMS adjustable pressure switch. They are available thru industrial supply houses. Also, try E-Bay. I do not remember the model #, only that it is a 1/8 npt fitting. Also, it cost about $40-50 dollars. Hope this helps!
|
![]() |
![]() |
![]() |
#3 |
Banned
Join Date: Mar 2009
Posts: 188
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
adjustable delay presure switches? Gee, just when I thought I left that stuff behind when I went Stock Eliminator racing .... guess not.
Maybe we should add adjustable pressure buttons for the brake pedal too? Maybe just a small delay box....won't hurt anything, right? I thought that stuff was for the Delay Box guys, guess not. That's pretty disappointing actually. Jok |
![]() |
![]() |
![]() |
#4 |
Member
Join Date: Mar 2008
Posts: 201
Likes: 22
Liked 507 Times in 35 Posts
|
![]()
Jok,
This is not a delay switch it works off of brake pressure, with no difference from a brake pedal switch and is legal and widely used. If these are illegal then brake pressure gauges should be as well. Darcy Clarke STK 6254 A/SA. F/SA, G/SA. H/SA |
![]() |
![]() |
![]() |
#5 |
Member
Join Date: Aug 2005
Location: Renton, Washington
Posts: 320
Likes: 0
Liked 4 Times in 2 Posts
|
![]()
Darcy.. give me a call 425 941-8765 i know someone who has what your looking for...are you going to Montana??? Jim Storms
|
![]() |
![]() |
![]() |
#6 |
Member
Join Date: Oct 2008
Location: Surrey B.C.
Posts: 135
Likes: 3
Liked 5 Times in 5 Posts
|
![]()
Can someone post the part number for the Gems adjustable pressure switch that everyone is using please? or any other brands that work. Thank-you.
__________________
6535 stk 81 Malibu K/SA |
![]() |
![]() |
![]() |
#7 |
Junior Member
Join Date: Oct 2008
Posts: 41
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
Your not allowed to use the finger button anymore?
|
![]() |
![]() |
![]() |
#8 |
Member
Join Date: Mar 2008
Posts: 201
Likes: 22
Liked 507 Times in 35 Posts
|
![]()
Hi Bob,
If I make it there I will buy the first round!! Darcy |
![]() |
![]() |
![]() |
#9 |
Member
Join Date: May 2002
Location: Green Creek (Tryon) North Carolina
Posts: 331
Likes: 69
Liked 99 Times in 21 Posts
|
![]()
While on the subject, you used to see a lot of brake line pressure gauges in use. Normally how much pressure is required to lock the front brakes during a burn out, or staging the car? I know you see a lot of guys pumping the brake pedal as hard and quick as a Nascar jackman lifting the car for a tire change. Don Jackson
|
![]() |
![]() |
![]() |
|
|