|
|
11-06-2008, 03:25 AM | #1 |
Junior Member
Join Date: Sep 2002
Location: Iowa
Posts: 3
Likes: 0
Liked 0 Times in 0 Posts
|
Muncie trans help
Can somebody tell me if the shift fork shafts that go through the muncie side cover can be changed from the ones that have a stud to the ones that use a bolt to hold the shift arm on? I exchanged the ones with a stud for the ones with a bolt with a friend who was restoring a 66 nova. When I tighten the shift arm down, it binds on the sidecover and won't move. Is there a difference between the two shafts.
Thank you, HQS |
11-06-2008, 10:06 PM | #2 |
Member
Join Date: Jun 2007
Location: St. Augustine, Fla.
Posts: 228
Likes: 511
Liked 39 Times in 9 Posts
|
Re: Muncie trans help
HQS,
The 64-68 Muncie used the "stud/nut" set up the 69 and up used the "bolt on" shift levers. Be sure you don't have a mix/match deal going on there with the shift forks and side cover. I bet that is your problem. I hope this info helps and always remember "shift happens". Good Luck, Reggie
__________________
Reggie Winkles 2650/Stock |
|
|