2011 Mustang V-6 Auto

Jakeman · 01-01-2020, 03:43 PM

I am dealing on a 2011 Mustang V-6 auto. I want to bracket race it and possibly race stock with it. Do you think this will be competitive in stock. Not trying to set records. Just want to be competitive. Thanks any input will be appreciated.

Billy Nees · 01-01-2020, 07:16 PM

Well, I have no experience with this combo at all. THAT being said, it has LOTS of compression, LOTS of valve area, good valve lift and a good sized throttle body. It will run J-K-L so IMHO it won't be a killer at 260 HP and it won't be cheap but it should run well.

Jakeman · 01-01-2020, 08:36 PM

Thank You Mr. Nees. The factory has it at 305hp.

impstocker · 01-02-2020, 04:21 AM

My Brother and I started a build on a 1997 Mustang convertible V6 for Q,R or T/SA 232 CID 150 HP NHRA rated 170 Putting together 8.8 rear with 5:13 at the moment, we believe will be able to run the index easy enough. Also using a C4 tranny. Will have to install roll bar due too rag top. Good luck with your build.

Will Lamprecht
1965 Impala G/H/I now with a stick
1997 Mustang V6

HawkBrosMav · 01-02-2020, 05:22 PM

Quote:

Originally Posted by Jakeman

Thank You Mr. Nees. The factory has it at 305hp.

I think you are mis-taking what Billy is saying... NHRA has the HP at 260... it matters not what Ford sold the car as. With an NHRA rating of 260 Billy does not feel like it will be a rocket against the index. We all realize it probably makes more than 260 that doesn't necessarily mean it's a competitive combo compared to others.. should be okay but probably not a combo where you can go 1.00 under without considerable testing and $$.

It seems to me to be a combo much like the Foxbody we have. Can be fairly solid with enough $$ but will never be a rocket ship against the index no matter what we spend. Still a fun car and we beat it to death as a bracket car...

It's more than paid for itself bracket racing which is much more than most stock/SS cars can say.

JHeath · 03-29-2020, 10:48 PM

If anybody wants to try this, I have a 2012 3.7 V6 engine, auto trans ,and a rear end , all out of a 2012 Mustang with 51K mileage.

goinbroke2 · 04-13-2020, 12:29 PM

I have a 3.7 in my 2011 f-150.

As a "base" six cyl pick up engine (think 300 six from years ago) this thing is a screamer!!!
If I mat it and hold, it (as well as 3 other 3.7's I tried in minivans/pick ups) it shifts at 6750rpm and after one or two gears it is hitting 7000 shift points. FROM THE FACTORY!!

It would be a labour intensive job to pull a head/etc, but I see a LOT of potential in an all aluminum, 4v per cyl, dohc engine!

I could see this flowing enough (with more duration of course) to run 8500+ in stock.
Love to hear if anyone has built one for racing. (and not the twin turbo crowd either lol)

01-01-2020, 03:43 PM	#1
Jakeman Junior Member Join Date: Dec 2019 Posts: 9 Likes: 14 Liked 1 Time in 1 Post	2011 Mustang V-6 Auto I am dealing on a 2011 Mustang V-6 auto. I want to bracket race it and possibly race stock with it. Do you think this will be competitive in stock. Not trying to set records. Just want to be competitive. Thanks any input will be appreciated.

01-01-2020, 07:16 PM	#2
Billy Nees VIP Member Join Date: Oct 2002 Location: On a hilltop in Pa. Posts: 4,383 Likes: 3,405 Liked 7,304 Times in 1,644 Posts	Re: 2011 Mustang V-6 Auto Well, I have no experience with this combo at all. THAT being said, it has LOTS of compression, LOTS of valve area, good valve lift and a good sized throttle body. It will run J-K-L so IMHO it won't be a killer at 260 HP and it won't be cheap but it should run well. __________________ Billy Nees 1188 STK, SS I'm OK..........it's everybody else.

01-01-2020, 08:36 PM	#3
Jakeman Junior Member Join Date: Dec 2019 Posts: 9 Likes: 14 Liked 1 Time in 1 Post	Re: 2011 Mustang V-6 Auto Thank You Mr. Nees. The factory has it at 305hp.

01-02-2020, 04:21 AM	#4
impstocker Member Join Date: Dec 2008 Location: Wingdale, NY Posts: 302 Likes: 27 Liked 54 Times in 16 Posts	Re: 2011 Mustang V-6 Auto My Brother and I started a build on a 1997 Mustang convertible V6 for Q,R or T/SA 232 CID 150 HP NHRA rated 170 Putting together 8.8 rear with 5:13 at the moment, we believe will be able to run the index easy enough. Also using a C4 tranny. Will have to install roll bar due too rag top. Good luck with your build. Will Lamprecht 1965 Impala G/H/I now with a stick 1997 Mustang V6 Last edited by impstocker; 01-02-2020 at 04:24 AM.

03-29-2020, 10:48 PM	#6
JHeath Senior Member Join Date: Jul 2004 Location: Minneapolis Posts: 788 Likes: 2,890 Liked 371 Times in 102 Posts	Re: 2011 Mustang V-6 Auto If anybody wants to try this, I have a 2012 3.7 V6 engine, auto trans ,and a rear end , all out of a 2012 Mustang with 51K mileage. __________________ Jerry Heath I/S '93 Cobra FS/J 2010 Mustang "Ebay CJ"

04-13-2020, 12:29 PM	#7
goinbroke2 Senior Member Join Date: Mar 2002 Location: NS CANADA Posts: 771 Likes: 881 Liked 212 Times in 84 Posts	Re: 2011 Mustang V-6 Auto I have a 3.7 in my 2011 f-150. As a "base" six cyl pick up engine (think 300 six from years ago) this thing is a screamer!!! If I mat it and hold, it (as well as 3 other 3.7's I tried in minivans/pick ups) it shifts at 6750rpm and after one or two gears it is hitting 7000 shift points. FROM THE FACTORY!! It would be a labour intensive job to pull a head/etc, but I see a LOT of potential in an all aluminum, 4v per cyl, dohc engine! I could see this flowing enough (with more duration of course) to run 8500+ in stock. Love to hear if anyone has built one for racing. (and not the twin turbo crowd either lol)