|
|
11-30-2013, 01:42 AM | #1 |
VIP Member
Join Date: Oct 2013
Location: Gulf Breeze, FL
Posts: 1,655
Likes: 8
Liked 33 Times in 16 Posts
|
'67 Camaro E/SA redo
A friend and I picked this car up a while back and we are working on it this winter with many upgrades in store. Car came to us with a Powerglide and numerous small problems...we are whittling them down one at a time.
As of this evening these are the completed items: Complete re-wire of the ignition system - New MSD distributor and coil - Altered bracketry for the Moroso water pump - New 5.14 Richmond gear - Caltrac's for the rear with Caltrac split leaf springs - New Moroso front springs - New shocks on all corners - Aerospace disc brakes front and rear and light weight master cylinder - Improved gauge package - New Champion wheels all around - (I splurged a bit here) Just about all problem areas have been addressed save one...Arnett is building us a Metric 200 atm and a ATI convertor will be added as well when it's ready. Come spring we will find out how good a motor we have in the car...can't think of anything else that would hold us back. The car is already very close to the class minimum weight for a 286/350 in E/SA.
__________________
Rich Taylor I/SA - 321 Last edited by HandOverFist; 11-30-2013 at 05:16 PM. Reason: added better photo's |
11-30-2013, 09:06 AM | #2 |
Senior Member
Join Date: Apr 2009
Location: Omaha, NE
Posts: 682
Likes: 153
Liked 76 Times in 43 Posts
|
Re: '67 Camaro E/SA redo
Looking good.
Where did you purchase the wheels from? What size are the rears and backspace? Clark |
11-30-2013, 11:39 AM | #3 |
VIP Member
Join Date: Oct 2013
Location: Gulf Breeze, FL
Posts: 1,655
Likes: 8
Liked 33 Times in 16 Posts
|
Re: '67 Camaro E/SA redo
I ordered the wheels from Champion... http://www.cwibeadlock.com/NBL%20Speed%20Series.htm
Rears are 15x10 w/5.0 backspace. Someone in the past had welded the spring perches in the wrong positions shifting everything toward the driver's side...I will have to run a 1/4" wheel spacer behind the passenger side wheel to clear the lower shock mount. We will run it this way this season and probably replace the housing next fall. Both my partner and I were so impressed with the wheels he plans on putting a set on his '66 Nova. What I really like is how Champion offers it's wheels in 1/4" increments for backspacing.
__________________
Rich Taylor I/SA - 321 Last edited by HandOverFist; 11-30-2013 at 11:47 AM. |
11-30-2013, 03:52 PM | #4 |
Member
Join Date: Jan 2008
Posts: 352
Likes: 18
Liked 19 Times in 12 Posts
|
Re: '67 Camaro E/SA redo
LOVE this car!!!!
__________________
Mitch Beri- The Motor City 1985 GT- “Stock-ish” 5.0 motor, AOD/ trans brake. 12.68 @ 101.31mph. https://www.facebook.com/groups/FOXBODYFLEAMARKET/ |
11-30-2013, 04:28 PM | #5 |
Live Reporter
Join Date: Jan 2011
Location: New Bern, NC
Posts: 3,398
Likes: 122
Liked 3,086 Times in 677 Posts
|
Re: '67 Camaro E/SA redo
Nice work. Love the new wheels they look awesome.
__________________
James Williamson W200 J/SA |
11-30-2013, 04:36 PM | #6 |
Member
Join Date: Feb 2009
Location: Weeki Wachee, Florida
Posts: 348
Likes: 416
Liked 18 Times in 12 Posts
|
Re: '67 Camaro E/SA redo
Nice looking car, job well done!
How quick was the car when you bought it?
__________________
"Real Race Cars Have Tailgates" |
03-09-2014, 12:07 PM | #7 |
Senior Member
Join Date: Apr 2009
Location: Omaha, NE
Posts: 682
Likes: 153
Liked 76 Times in 43 Posts
|
Re: '67 Camaro E/SA redo
|
03-09-2014, 05:36 PM | #8 |
VIP Member
Join Date: Oct 2013
Location: Gulf Breeze, FL
Posts: 1,655
Likes: 8
Liked 33 Times in 16 Posts
|
Re: '67 Camaro E/SA redo
Clark, we have not had the motor out of this car yet and I'm not sure what pieces were used atm.
__________________
Rich Taylor I/SA - 321 |
03-09-2014, 06:57 PM | #9 |
VIP Member
Join Date: Oct 2013
Location: Gulf Breeze, FL
Posts: 1,655
Likes: 8
Liked 33 Times in 16 Posts
|
Re: '67 Camaro E/SA redo
While it's down I will install the new battery...five pounds lighter and more cca (755) than the current resident.
__________________
Rich Taylor I/SA - 321 |
05-21-2014, 04:31 PM | #10 |
Junior Member
Join Date: Feb 2008
Posts: 11
Likes: 0
Liked 3 Times in 1 Post
|
Re: '67 Camaro E/SA redo
how much did the metric200 pick yours up thanks
|
|
|