|
![]() |
#1 |
Member
Join Date: Nov 2016
Location: Indianola Washington
Posts: 405
Likes: 0
Liked 455 Times in 147 Posts
|
![]()
I have tried E Mailing MSD at msdtechline@msdignition.com It comes back as non deliverable
Searched online but only telephone number. Does anyone know a correct e mail for MSD technical help for ignitions? I dont want to wait on hold forever and I want info in writing. Steve Teeter. B/SA 620 |
![]() |
![]() |
![]() |
#2 |
VIP Member
Join Date: Feb 2006
Location: Dela-where?
Posts: 2,193
Likes: 1,162
Liked 1,877 Times in 577 Posts
|
![]()
Unknown about their e mail. But I had a friend call them ( I told him to ask for joe) no luck with that. But the guy he got blew him off. No help at all. I ended up walking him through his issues on a FaceTime call. Very disappointed when these companies get sold and all tech help goes to ****!
__________________
KEITH MAYERS 2-1/2 X somebody Still many X nobody |
![]() |
![]() |
![]() |
#3 |
VIP Member
Join Date: Feb 2004
Location: LONG ISLAND N.Y.
Posts: 1,679
Likes: 3,383
Liked 1,826 Times in 426 Posts
|
![]()
Calling is your best bet
__________________
james perrone 1290 STK |
![]() |
![]() |
Liked |
![]() |
#4 |
Member
Join Date: May 2014
Location: E TN
Posts: 473
Likes: 16
Liked 133 Times in 76 Posts
|
![]()
Been a while but I think their web site has a forum for tech questions.
|
![]() |
![]() |
![]() |
#5 |
VIP Member
Join Date: Nov 2007
Location: New Jersey
Posts: 2,628
Likes: 160
Liked 759 Times in 379 Posts
|
![]()
Being that you can't reach Joe Pando and this is Stock and Super Stock Tech, what is your ignition question?
|
![]() |
![]() |
![]() |
#6 | |
Member
Join Date: Nov 2016
Location: Indianola Washington
Posts: 405
Likes: 0
Liked 455 Times in 147 Posts
|
![]() Quote:
Understand Sequence and 30 degrees max combining all three retard wires BUT, Can one put 12 Vs to the Pink wire , then remove it and put 12 Vs to the Violet wire or does power have to remain to the Pink Wire to make then the Violet wire function and so on to Tan wire ? Or do all three operate independently of each other with 15 degree max to a single wire. |
|
![]() |
![]() |
![]() |
#7 |
Junior Member
Join Date: Apr 2023
Location: Columbus, OH
Posts: 77
Likes: 105
Liked 124 Times in 42 Posts
|
![]()
Do you have the original instructions for the box?
__________________
Div 3 Sales, Service and Tech for many manufacturers |
![]() |
![]() |
![]() |
#8 |
Member
Join Date: Nov 2016
Location: Indianola Washington
Posts: 405
Likes: 0
Liked 455 Times in 147 Posts
|
![]() |
![]() |
![]() |
![]() |
#9 |
Member
Join Date: Feb 2023
Location: Inver Grove Heights, MN
Posts: 177
Likes: 467
Liked 225 Times in 96 Posts
|
![]()
Couldn't you test it, possibly without the car even running, with the Graphview software showing you which/how many retards are active when applying 12v to each wire?
__________________
Tony Leonard S/ST 56 S/C 53 |
![]() |
![]() |
![]() |
#10 | |
Member
Join Date: Nov 2016
Location: Indianola Washington
Posts: 405
Likes: 0
Liked 455 Times in 147 Posts
|
![]() Quote:
Running the engine and having three separate switches with a 12V power source and then with a Timing light , put 12V to each wire separately to verify timing changes. Then you would know for sure does each wire operate independently of the other or not. Someone at MSD has to know the answer that would save the time, expense and effort of doing this. |
|
![]() |
![]() |
![]() |
|
|