|
09-11-2018, 10:55 PM | #1 |
Junior Member
Join Date: Nov 2013
Posts: 30
Likes: 0
Liked 4 Times in 4 Posts
|
When do you shift
Just curious, when do you go on the stop, when do you shift and what rpm do you cruise at. Just wondering how many different set ups people use
|
09-12-2018, 10:03 AM | #2 |
Senior Member
Join Date: Nov 2015
Location: Inver Grove Heights, MN
Posts: 898
Likes: 604
Liked 432 Times in 225 Posts
|
Re: When do you shift
My car is slow, so to get it rolling I go on the stop at 0.500. Cruise at 4200 (RPM set in the pits. I don't know what RPM it actually cruises at on the track). Off the stop somewhere around 1.600 and shift by hand at 7000 rpm.
__________________
S/ST 51 S/C 53 |
09-12-2018, 02:25 PM | #3 |
Junior Member
Join Date: Nov 2013
Posts: 30
Likes: 0
Liked 4 Times in 4 Posts
|
Re: When do you shift
I go on TS at .08, cruise at 4200 and shift at .40. 10.90@138
|
09-17-2018, 02:56 PM | #5 |
Junior Member
Join Date: Jun 2007
Posts: 17
Likes: 0
Liked 0 Times in 0 Posts
|
Re: When do you shift
@ 2850 Lbs on the stop at .000, shift .75, 4200 stop rpm, between 3.75 & 4.25 sec. in the stop. 10.90@152
__________________
Gary Federico 1814 SST |
09-17-2018, 05:16 PM | #6 |
VIP Member
Join Date: Feb 2006
Location: Dela-where?
Posts: 2,153
Likes: 1,060
Liked 1,739 Times in 551 Posts
|
Re: When do you shift
I’m not saying, But its somewhere between zero and 10.90. 😆
__________________
KEITH MAYERS 2 X somebody many X nobody |
09-17-2018, 07:06 PM | #7 |
Banned
Join Date: Dec 2007
Location: Lake Placid, Florida
Posts: 3,207
Likes: 1,049
Liked 235 Times in 110 Posts
|
Re: When do you shift
Right before the holes appear in the oil pan !
|
09-17-2018, 08:27 PM | #8 |
Junior Member
Join Date: Nov 2013
Posts: 30
Likes: 0
Liked 4 Times in 4 Posts
|
Re: When do you shift
|
09-18-2018, 04:04 PM | #9 |
Junior Member
Join Date: Jun 2007
Posts: 17
Likes: 0
Liked 0 Times in 0 Posts
|
Re: When do you shift
The transitions were smooth & that's what I looked for. But Keith has the inside stuff, he just doesn't share as well as play well with others on the 1320.
__________________
Gary Federico 1814 SST |
09-18-2018, 09:07 PM | #10 |
Junior Member
Join Date: Nov 2013
Posts: 30
Likes: 0
Liked 4 Times in 4 Posts
|
Re: When do you shift
When I had my big motor in the car I could go on at .001 and shift at .20 and it was consistent. When I put the 467 back in, it seems to struggle sometimes shifting that early and the 60s aren’t consistent. The farther out I move the shift with this motor, the more consistent it seems to get. I think it knocks the breath out of this smaller motor when the air is bad. That’s why I was curious
|
|
|