Machinist for Stocker build

Tony Corley · 02-15-2015, 07:48 PM

Any recommendations for a machinist for a IHRA Pure Stock, small block Ford build in the Southeast?(I'm in SC). I am not opposed to shipping as long as I get what I request. I have a couple of guys I have used in the past, but they specialize in big inch, nitrous engines, and don't give me the impression that they are willing or see the need in doing the machine work I want on what they deem as "throw away" parts, lol. Especially looking for someone to do a set of heads. It would suck to have to spend the money on equipment to do them like I want them, lol.

SSDiv6 · 02-16-2015, 12:19 AM

Quote:

Originally Posted by Tony Corley

Any recommendations for a machinist for a IHRA Pure Stock, small block Ford build in the Southeast?(I'm in SC). I am not opposed to shipping as long as I get what I request. I have a couple of guys I have used in the past, but they specialize in big inch, nitrous engines, and don't give me the impression that they are willing or see the need in doing the machine work I want on what they deem as "throw away" parts, lol. Especially looking for someone to do a set of heads. It would suck to have to spend the money on equipment to do them like I want them, lol.

Talk to Charlie Booze at Booze Brothers Performance in Marion, PA.

Dan Fahey · 02-16-2015, 12:52 AM

Quote:

Originally Posted by Tony Corley

Any recommendations for a machinist for a IHRA Pure Stock, small block Ford build in the Southeast?(I'm in SC). I am not opposed to shipping as long as I get what I request. I have a couple of guys I have used in the past, but they specialize in big inch, nitrous engines, and don't give me the impression that they are willing or see the need in doing the machine work I want on what they deem as "throw away" parts, lol. Especially looking for someone to do a set of heads. It would suck to have to spend the money on equipment to do them like I want them, lol.

Hey Tony
What car are you building?
Send me a picture to up date the Pure Stock photos gallery.
Jeff Warren built my PS LT1.

Dan

Tony Corley · 02-16-2015, 08:16 AM

Quote:

Originally Posted by SSDiv6

Talk to Charlie Booze at Booze Brothers Performance in Marion, PA.

I know of Charlie from NMRA, had not thought about him.

Tony Corley · 02-16-2015, 08:23 AM

Quote:

Originally Posted by Dan Fahey

Hey Tony
What car are you building?
Send me a picture to up date the Pure Stock photos gallery.
Jeff Warren built my PS LT1.

Dan

Dan,
1994 Mustang GT 5.0. I am putting the 1989 Mustang NHRA Stocker I am building on hold to finish this to be able to do some racing this year. Waiting for Mike Baker to get cam specs, but ready for engine to go to machine. I enjoy reading everyone elses so much that I am planning on a build thread as soon as it moves along a little. Just bought the car last week, lol.

Dave Ribeiro · 02-16-2015, 09:24 AM

Tony,

You need to talk to Top Gun , Tim Sloan, Warren's & several others in your area .. There's a CCRS race at VMP in mid- March, good time to see & meet racers... (Stock & S/S races ).. Good Luck, with your Build ...

Tony Corley · 02-16-2015, 09:37 AM

Thanks Dave.

69Cobra · 02-17-2015, 10:33 PM

Hey Tony,
Have you talked to Blair Patrick?

Tony Corley · 02-18-2015, 10:42 AM

No, I have not.

Dave1695 · 02-18-2015, 11:26 AM

Call Tim Sloan in Sanford NC 919-258-5616. He builds some fast Stockers, I'm sure he can help you!

02-15-2015, 07:48 PM	#1
Tony Corley Member Join Date: Nov 2011 Posts: 264 Likes: 42 Liked 61 Times in 25 Posts	Machinist for Stocker build Any recommendations for a machinist for a IHRA Pure Stock, small block Ford build in the Southeast?(I'm in SC). I am not opposed to shipping as long as I get what I request. I have a couple of guys I have used in the past, but they specialize in big inch, nitrous engines, and don't give me the impression that they are willing or see the need in doing the machine work I want on what they deem as "throw away" parts, lol. Especially looking for someone to do a set of heads. It would suck to have to spend the money on equipment to do them like I want them, lol.

02-16-2015, 09:24 AM	#6
Dave Ribeiro VIP Member Join Date: Sep 2002 Location: Williamsburg, Va.---USA Posts: 1,827 Likes: 1,612 Liked 56 Times in 27 Posts	Re: Machinist for Stocker build Tony, You need to talk to Top Gun , Tim Sloan, Warren's & several others in your area .. There's a CCRS race at VMP in mid- March, good time to see & meet racers... (Stock & S/S races ).. Good Luck, with your Build ... __________________ Dave Ribeiro 1033 STK

02-16-2015, 09:37 AM	#7
Tony Corley Member Join Date: Nov 2011 Posts: 264 Likes: 42 Liked 61 Times in 25 Posts	Re: Machinist for Stocker build Thanks Dave.

02-17-2015, 10:33 PM	#8
69Cobra Senior Member Join Date: Aug 2007 Location: California, Ky Posts: 669 Likes: 61 Liked 2 Times in 2 Posts	Re: Machinist for Stocker build Hey Tony, Have you talked to Blair Patrick? __________________ Kris Rachford 69 Cobra 428CJ 4 Speed C/S 3032

02-18-2015, 10:42 AM	#9
Tony Corley Member Join Date: Nov 2011 Posts: 264 Likes: 42 Liked 61 Times in 25 Posts	Re: Machinist for Stocker build No, I have not.

02-18-2015, 11:26 AM	#10
Dave1695 Member Join Date: May 2009 Posts: 160 Likes: 0 Liked 15 Times in 11 Posts	Re: Machinist for Stocker build Call Tim Sloan in Sanford NC 919-258-5616. He builds some fast Stockers, I'm sure he can help you!