Chassis Dyno Questions

Pistol Pete · 12-22-2013, 11:05 AM

I have a place here in NJ to take my car, just wondering what to try on the dyno ??

If Anyone had their car on a chassis dyno & can shed some light it would be
Greatly Appreciated.

I run a 305 F.I. Stock Elim. Car.

Bob Pagano · 12-22-2013, 01:11 PM

Shop down on rt 9 dose it, cant remember the name. They are still there last I looked

Bob Pagano · 12-22-2013, 06:26 PM

Ida Automotive , Just thought of it, they did Bardkoffs wedge a few years ago.

Pistol Pete · 12-31-2013, 03:41 PM

Any Help Out There....

jim powers · 12-31-2013, 04:34 PM

jetting changes---different carburetors----- if you are feeling especially chipper maybe a converter swap??--different headers--different timing levels

buzzinhalfdozen · 12-31-2013, 05:48 PM

Looks like he stated it's an injected engine, mapping the fuel table would be my first step then bring in the timing map to finish off. Assuming you can make those sort of changes. Short of making mechanical changes to the engine. Joe

B Parker · 12-31-2013, 06:06 PM

Pete You may not like my answer but Joe has it part way right. Unless you have a breaking up problem that you are trying to find. I would save the money your going to spend on the chassis dyno. The mapping I would be doing is the route to one of the several good engine shops we have here in Div. 1 You may need to sell your brothers family car but it will be worth it in the long run. If I have learned anything racing It's cheaper to do it right the first time. If you don't you will spend the same amount trying to save money doing wrong several times. Love you Brother Barry

Mark Markow · 12-31-2013, 06:10 PM

I have heard that jeff roell at Danbury chassis dyno in ct. is pretty good with fuel injected stuff.

Dave Ribeiro · 12-31-2013, 06:36 PM

Pete,

I agree with Mark, Jeff is pretty good with tuning both carbs /injection...
You should talk to your buddy Joe Dee , he knows Jeff well...
I wish I was closer to Jeff , so he could help me out.... Good Luck..

Lee Valentine · 12-31-2013, 07:57 PM

X's 3 on Jeff. If your engine is a good piece it's all in the F.I. tuning. Lee.

12-22-2013, 11:05 AM	#1
Pistol Pete VIP Member Join Date: Oct 2003 Location: Punta Gorda Isles, Fl. Posts: 1,626 Likes: 3,403 Liked 779 Times in 209 Posts	Chassis Dyno Questions I have a place here in NJ to take my car, just wondering what to try on the dyno ?? If Anyone had their car on a chassis dyno & can shed some light it would be Greatly Appreciated. I run a 305 F.I. Stock Elim. Car. __________________ "Pistol" Pete Dutko

12-22-2013, 01:11 PM	#2
Bob Pagano VIP Member Join Date: Jun 2002 Location: New Holland, PA Mooresville,NC Posts: 1,163 Likes: 240 Liked 16 Times in 11 Posts	Re: Chassis Dyno Questions Shop down on rt 9 dose it, cant remember the name. They are still there last I looked __________________ Bob Pagano A/SA

12-22-2013, 06:26 PM	#3
Bob Pagano VIP Member Join Date: Jun 2002 Location: New Holland, PA Mooresville,NC Posts: 1,163 Likes: 240 Liked 16 Times in 11 Posts	Re: Chassis Dyno Questions Ida Automotive , Just thought of it, they did Bardkoffs wedge a few years ago. __________________ Bob Pagano A/SA

12-31-2013, 03:41 PM	#4
Pistol Pete VIP Member Join Date: Oct 2003 Location: Punta Gorda Isles, Fl. Posts: 1,626 Likes: 3,403 Liked 779 Times in 209 Posts	Re: Chassis Dyno Questions Any Help Out There.... __________________ "Pistol" Pete Dutko

12-31-2013, 04:34 PM	#5
jim powers Member Join Date: Nov 2001 Location: manville nj Posts: 359 Likes: 198 Liked 13 Times in 10 Posts	Re: Chassis Dyno Questions jetting changes---different carburetors----- if you are feeling especially chipper maybe a converter swap??--different headers--different timing levels

12-31-2013, 05:48 PM	#6
buzzinhalfdozen Senior Member Join Date: Sep 2006 Location: Bellevue Ohio Posts: 984 Likes: 0 Liked 11 Times in 8 Posts	Re: Chassis Dyno Questions Looks like he stated it's an injected engine, mapping the fuel table would be my first step then bring in the timing map to finish off. Assuming you can make those sort of changes. Short of making mechanical changes to the engine. Joe __________________ Joe Buchanan SS/BX 3117

12-31-2013, 06:06 PM	#7
B Parker Senior Member Join Date: Sep 2009 Posts: 849 Likes: 980 Liked 2,336 Times in 464 Posts	Re: Chassis Dyno Questions Pete You may not like my answer but Joe has it part way right. Unless you have a breaking up problem that you are trying to find. I would save the money your going to spend on the chassis dyno. The mapping I would be doing is the route to one of the several good engine shops we have here in Div. 1 You may need to sell your brothers family car but it will be worth it in the long run. If I have learned anything racing It's cheaper to do it right the first time. If you don't you will spend the same amount trying to save money doing wrong several times. Love you Brother Barry

12-31-2013, 06:10 PM	#8
Mark Markow Senior Member Join Date: Apr 2008 Location: east hartford ct. Posts: 539 Likes: 0 Liked 9 Times in 3 Posts	Re: Chassis Dyno Questions I have heard that jeff roell at Danbury chassis dyno in ct. is pretty good with fuel injected stuff. __________________ Mark Markow 171 ss/tb

12-31-2013, 06:36 PM	#9
Dave Ribeiro VIP Member Join Date: Sep 2002 Location: Williamsburg, Va.---USA Posts: 1,827 Likes: 1,612 Liked 56 Times in 27 Posts	Re: Chassis Dyno Questions Pete, I agree with Mark, Jeff is pretty good with tuning both carbs /injection... You should talk to your buddy Joe Dee , he knows Jeff well... I wish I was closer to Jeff , so he could help me out.... Good Luck.. __________________ Dave Ribeiro 1033 STK

12-31-2013, 07:57 PM	#10
Lee Valentine Senior Member Join Date: May 2004 Location: Brookfield, CT Posts: 708 Likes: 13 Liked 319 Times in 68 Posts	Re: Chassis Dyno Questions X's 3 on Jeff. If your engine is a good piece it's all in the F.I. tuning. Lee. __________________ Lee Valentine 1661 STK