Ring & Pinion Lube

Jim Wahl · 07-01-2012, 12:49 AM

What is the best grease to use in a Stocker rear? Jim

.

Alan Roehrich · 07-01-2012, 02:27 AM

Richmond blue synthetic.

Myron Piatek · 07-01-2012, 07:29 AM

I've been using Amsoil Severe Gear 75w-90 for many years and have been happy with the results. It's in my Dodge dually also.

Dragsinger · 07-01-2012, 08:24 AM

For about three years I have been experimenting with Lucas products. I thought since Lucas is such a positive company for drag racing I would try the products.

So far I am very happy. My 12 bolt rear with 5.38 gears look like new after 150 runs. The 4.57 gears in 9" are the same. Engine bearings in a 408 SBC and 496 BBC are perfect. Two different powerglides look great after a full season.

I use the following Lucas products
*20w/50 "Plus" engine oil
*Semi-synthetic assembly lube
*Semi-synthetic ATF
and to answer your question about rear gear oil
*HD 80w90

I am satisfied Lucas is a good company with good products. It may require some shopping but can usually be bought at competitive pricing.

Mile High · 07-02-2012, 11:17 AM

Pick your favorite brand and use their synthetic gear lube. I've been using synthetic for years. No big warm up procedure, it's ready to go.

Jeff

Walt Reynolds · 07-02-2012, 05:03 PM

I switched to Strange US Gear 5.38 for Dragweek 2011. The tech guys at Strange said do not use any Synthetic Lube. They recomended Lucas. This was the first time on Dragweek that I didn't screw up a ring and pinion.

Michael Compton · 07-02-2012, 05:16 PM

I use the Joe Gibbs 75W110 in my Ford 9". Came highly recommended from Wayne @ Indy Gear. So far so good!

randy wilson · 07-02-2012, 05:21 PM

I use one quart good synthetic, 1\2 quart synthetic auto fluid, and a pint of problend. It's a 5 speed unit, and mark williams center, with over 100 runs, 0 problems. Just me, and might not work for others.

Mike Pearson · 07-03-2012, 08:25 AM

Jim,

I have Mobile 1 synthetic in mine. So many runs I cant remember when I put the last ring and pinion in the car. I have also used Valvoline synthetic as well with similar results. I have a dana though.

1320racer · 07-04-2012, 11:31 PM

Been using nothing but Mobil 1 synthetic gear lube for the past 2 decades. Current Richmond Pro R&P in my 9" with a MW "Pro Stock Assembly" 3rd member have 720 passes on them, 60 footing low 1.20s to high 1 teens.

07-01-2012, 12:49 AM	#1
Jim Wahl Veteran Member Join Date: Jan 2002 Location: Central Florida Posts: 5,844 Likes: 666 Liked 683 Times in 129 Posts	Ring & Pinion Lube What is the best grease to use in a Stocker rear? Jim . __________________ Jim Wahl....NHRA #2239 S/SS - IHRA # 8 Stock, D2 Stock Champion (forever I guess) 2019 Baby Gators Stock Champion 2009 NHRA D2 National Open Stock Champion 1982 NHRA D2 West Palm Beach LDRS SS Runner Up Past President, Southern Stock / Super Stock Association. Last edited by Jim Wahl; 07-01-2012 at 12:52 AM.

07-01-2012, 02:27 AM	#2
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,104 Likes: 1,560 Liked 1,784 Times in 407 Posts	Re: Ring & Pinion Lube Richmond blue synthetic. __________________ Alan Roehrich 212A G/S

07-01-2012, 07:29 AM	#3
Myron Piatek VIP Member Join Date: Nov 2001 Location: Florida Posts: 1,542 Likes: 34 Liked 138 Times in 51 Posts	Re: Ring & Pinion Lube I've been using Amsoil Severe Gear 75w-90 for many years and have been happy with the results. It's in my Dodge dually also.

07-01-2012, 08:24 AM	#4
Dragsinger VIP Member Join Date: Jul 2008 Location: Liberty City [East Texas] Posts: 1,760 Likes: 5 Liked 99 Times in 60 Posts	Re: Ring & Pinion Lube For about three years I have been experimenting with Lucas products. I thought since Lucas is such a positive company for drag racing I would try the products. So far I am very happy. My 12 bolt rear with 5.38 gears look like new after 150 runs. The 4.57 gears in 9" are the same. Engine bearings in a 408 SBC and 496 BBC are perfect. Two different powerglides look great after a full season. I use the following Lucas products 20w/50 "Plus" engine oil Semi-synthetic assembly lube Semi-synthetic ATF and to answer your question about rear gear oil HD 80w90 I am satisfied Lucas is a good company with good products. It may require some shopping but can usually be bought at competitive pricing. __________________ Larry Woodfin 471W

07-02-2012, 11:17 AM	#5
Mile High Member Join Date: Mar 2010 Location: My RV Posts: 218 Likes: 0 Liked 0 Times in 0 Posts	Re: Ring & Pinion Lube Pick your favorite brand and use their synthetic gear lube. I've been using synthetic for years. No big warm up procedure, it's ready to go. Jeff __________________ Street legal 64 Falcon Sprint with 410W living in Texas. Stock - Super Stock fan

07-02-2012, 05:03 PM	#6
Walt Reynolds Junior Member Join Date: Mar 2009 Location: Lucas (Dallas) Texas Posts: 40 Likes: 0 Liked 0 Times in 0 Posts	Re: Ring & Pinion Lube I switched to Strange US Gear 5.38 for Dragweek 2011. The tech guys at Strange said do not use any Synthetic Lube. They recomended Lucas. This was the first time on Dragweek that I didn't screw up a ring and pinion.

07-02-2012, 05:16 PM	#7
Michael Compton Member Join Date: Dec 2003 Location: Neosho, MO Posts: 215 Likes: 0 Liked 59 Times in 13 Posts	Re: Ring & Pinion Lube I use the Joe Gibbs 75W110 in my Ford 9". Came highly recommended from Wayne @ Indy Gear. So far so good!

07-02-2012, 05:21 PM	#8
randy wilson Senior Member Join Date: Jan 2007 Location: N/A Posts: 882 Likes: 0 Liked 22 Times in 22 Posts	Re: Ring & Pinion Lube I use one quart good synthetic, 1\2 quart synthetic auto fluid, and a pint of problend. It's a 5 speed unit, and mark williams center, with over 100 runs, 0 problems. Just me, and might not work for others. __________________ don,t have one

07-03-2012, 08:25 AM	#9
Mike Pearson VIP Member Join Date: Mar 2007 Posts: 2,443 Likes: 613 Liked 1,915 Times in 574 Posts	Re: Ring & Pinion Lube Jim, I have Mobile 1 synthetic in mine. So many runs I cant remember when I put the last ring and pinion in the car. I have also used Valvoline synthetic as well with similar results. I have a dana though. __________________ Mike Pearson 2485 SS

07-04-2012, 11:31 PM	#10
1320racer VIP Member Join Date: Nov 2007 Location: New Jersey Posts: 2,628 Likes: 160 Liked 759 Times in 379 Posts	Re: Ring & Pinion Lube Been using nothing but Mobil 1 synthetic gear lube for the past 2 decades. Current Richmond Pro R&P in my 9" with a MW "Pro Stock Assembly" 3rd member have 720 passes on them, 60 footing low 1.20s to high 1 teens. Last edited by 1320racer; 07-04-2012 at 11:49 PM.