? about stocker pistons

mcashman · 10-28-2011, 09:26 PM

In stock doses the piston need to have an nhra appovered stamp on it or just the correct part number from the apporved list?

STK1217 · 10-28-2011, 10:12 PM

As far as i know all it needs is the MFG. # from the list.

Lew Silverman · 10-28-2011, 10:14 PM

The Lunati's I bought had both, stamped into the face of the piston, "NHRA" and the part number. I'm not sure if every company does this, but I would bet that as long as the part number is on the approved list you should be good to go!

Lew

Alan Roehrich · 10-28-2011, 10:44 PM

My CP pistons did not have an NHRA approved stamp on them, just the NHRA accepted number. My JE pistons all have the NHRA logo on them. You can run all sorts of off the shelf pistons from various manufacturers, many of whom do not even make a special piston for Stock Eliminator. So you do not need any sort of special marking.

Tom Moock · 10-29-2011, 01:45 AM

Alan, I think if you have an aftermarket piston, not stock piston, without approved nhra # stamped on it, they would have you pull a piston out of the motor. Tom

Alan Roehrich · 10-29-2011, 02:27 AM

Tom, I was referring to a special marking, like the NHRA logo on my JE pistons.

For example, my CP pistons just had C4CP on them. That's the NHRA approved number. If you put a set of Speed Pro/Federal Mogul/TRW pistons in, so long as they had the correct part number, I don't think they'd need a special marking.

mcashman · 10-29-2011, 10:50 AM

Thanks for the info guys.

10-28-2011, 09:26 PM	#1
mcashman Junior Member Join Date: Oct 2007 Location: Westminster MD Posts: 82 Likes: 16 Liked 6 Times in 3 Posts	? about stocker pistons In stock doses the piston need to have an nhra appovered stamp on it or just the correct part number from the apporved list?

10-28-2011, 10:12 PM	#2
STK1217 Member Join Date: Nov 2006 Posts: 137 Likes: 48 Liked 10 Times in 7 Posts	Re: ? about stocker pistons As far as i know all it needs is the MFG. # from the list.

10-28-2011, 10:14 PM	#3
Lew Silverman VIP Member Join Date: Mar 2010 Location: Newport News, VA Posts: 1,435 Likes: 371 Liked 129 Times in 59 Posts	Re: ? about stocker pistons The Lunati's I bought had both, stamped into the face of the piston, "NHRA" and the part number. I'm not sure if every company does this, but I would bet that as long as the part number is on the approved list you should be good to go! Lew __________________ Lew Silverman #2070 "The Wagon Master" N/SA

10-28-2011, 10:44 PM	#4
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,111 Likes: 1,570 Liked 1,812 Times in 413 Posts	Re: ? about stocker pistons My CP pistons did not have an NHRA approved stamp on them, just the NHRA accepted number. My JE pistons all have the NHRA logo on them. You can run all sorts of off the shelf pistons from various manufacturers, many of whom do not even make a special piston for Stock Eliminator. So you do not need any sort of special marking. __________________ Alan Roehrich 212A G/S

10-29-2011, 01:45 AM	#5
Tom Moock Senior Member Join Date: May 2004 Posts: 801 Likes: 1 Liked 10 Times in 6 Posts	Re: ? about stocker pistons Alan, I think if you have an aftermarket piston, not stock piston, without approved nhra # stamped on it, they would have you pull a piston out of the motor. Tom __________________ Tom Moock 5704 STK

10-29-2011, 02:27 AM	#6
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,111 Likes: 1,570 Liked 1,812 Times in 413 Posts	Re: ? about stocker pistons Tom, I was referring to a special marking, like the NHRA logo on my JE pistons. For example, my CP pistons just had C4CP on them. That's the NHRA approved number. If you put a set of Speed Pro/Federal Mogul/TRW pistons in, so long as they had the correct part number, I don't think they'd need a special marking. __________________ Alan Roehrich 212A G/S

10-29-2011, 10:50 AM	#7
mcashman Junior Member Join Date: Oct 2007 Location: Westminster MD Posts: 82 Likes: 16 Liked 6 Times in 3 Posts	Re: ? about stocker pistons Thanks for the info guys.