MSD ignition no spark question

shockme668 · 01-17-2011, 05:29 PM

I have a MSD 6AL with a blaster ss coil and have a spark from the coil, but not at the plug.. I remove the wire from the cap and put it near ground and cranked the motor and there is a spark from the coil. I put the wire back on the cap and remove the wire at the plugs put near ground crank the motor, no spark at the plug. The cap and rotor are new. I am stumped where to go next...Any assistance would be appreciated...Thanks

1320racer · 01-17-2011, 06:07 PM

follow this procedure...

http://www.msdignition.com/page.aspx?id=3206

shockme668 · 01-17-2011, 08:15 PM

I tried the link you sent me...I was getting a spark from the Blaster ss coil but it was weak and needed to be about 1/8 inch to ground not the recommended 1/2 inch...I just got back from the auto part store with a new coil and it started...Thanks for the help......

01-17-2011, 05:29 PM	#1
shockme668 Junior Member Join Date: Oct 2009 Posts: 20 Likes: 0 Liked 0 Times in 0 Posts	MSD ignition no spark question I have a MSD 6AL with a blaster ss coil and have a spark from the coil, but not at the plug.. I remove the wire from the cap and put it near ground and cranked the motor and there is a spark from the coil. I put the wire back on the cap and remove the wire at the plugs put near ground crank the motor, no spark at the plug. The cap and rotor are new. I am stumped where to go next...Any assistance would be appreciated...Thanks

01-17-2011, 06:07 PM	#2
1320racer VIP Member Join Date: Nov 2007 Location: New Jersey Posts: 2,628 Likes: 160 Liked 759 Times in 379 Posts	Re: MSD ignition no spark question follow this procedure... http://www.msdignition.com/page.aspx?id=3206

01-17-2011, 08:15 PM	#3
shockme668 Junior Member Join Date: Oct 2009 Posts: 20 Likes: 0 Liked 0 Times in 0 Posts	Re: MSD ignition no spark question I tried the link you sent me...I was getting a spark from the Blaster ss coil but it was weak and needed to be about 1/8 inch to ground not the recommended 1/2 inch...I just got back from the auto part store with a new coil and it started...Thanks for the help......