69 superbee 440 six pac

jasondearduff · 08-20-2010, 03:05 PM

hi guys, hopefully someone on the forum can help me out. i just got the engine for this car it is in long block forum. can someone educate me on oil pan gaskets and intake valley pan. i am used to working on chevrolets so this is greek to me. there is a oil spash sheild that bolts to the block before the oil pan. do you use any silicoe on it or just gaskets. how a bout the intake do you use a silicone bead under the valley pan on the block rails. please forgive me for being mopar dumb, i am learing to appreciate this car for what it is. thanks

Phillip marvetz · 08-20-2010, 06:05 PM

I assume you are talking about the stock windage try? You are supposed to use a gasket on either side of it and for the intake I use the brush on sealer that is usually supplied with the valley pan. Felpro use to offer a paper type gasket for the sixpack intake also but I haven't seen one of those in ten years or so.

jasondearduff · 08-21-2010, 08:32 PM

tjanks that helps, if anyone else has any tidbits for help let me know. this is a factory correct frame off resto not a all out stocker drag car so don't worry about me stealing your speed secrets.

08-20-2010, 03:05 PM	#1
jasondearduff Junior Member Join Date: Jan 2010 Posts: 30 Likes: 0 Liked 0 Times in 0 Posts	69 superbee 440 six pac hi guys, hopefully someone on the forum can help me out. i just got the engine for this car it is in long block forum. can someone educate me on oil pan gaskets and intake valley pan. i am used to working on chevrolets so this is greek to me. there is a oil spash sheild that bolts to the block before the oil pan. do you use any silicoe on it or just gaskets. how a bout the intake do you use a silicone bead under the valley pan on the block rails. please forgive me for being mopar dumb, i am learing to appreciate this car for what it is. thanks

08-20-2010, 06:05 PM	#2
Phillip marvetz Senior Member Join Date: Oct 2008 Location: Lynden ,WA Posts: 820 Likes: 0 Liked 3 Times in 3 Posts	Re: 69 superbee 440 six pac I assume you are talking about the stock windage try? You are supposed to use a gasket on either side of it and for the intake I use the brush on sealer that is usually supplied with the valley pan. Felpro use to offer a paper type gasket for the sixpack intake also but I haven't seen one of those in ten years or so. __________________ 2009 V/SA Record Holder Last edited by Phillip marvetz; 08-22-2010 at 03:52 PM.

08-21-2010, 08:32 PM	#3
jasondearduff Junior Member Join Date: Jan 2010 Posts: 30 Likes: 0 Liked 0 Times in 0 Posts	Re: 69 superbee 440 six pac tjanks that helps, if anyone else has any tidbits for help let me know. this is a factory correct frame off resto not a all out stocker drag car so don't worry about me stealing your speed secrets.