Jerico Question

Don Fardie · 04-18-2008, 09:35 PM

Has anyone had to replace the bushing that is in the tail section of a DR-4. When installing my driveshaft today I noticed it was binding the farther I pushed it in to gain access to set the rear U-Joints. I ended up removing the tail section and noticed the bushing was wiped. I have a good idea what may have caused it, but not sure in which direction the bushing is removed. Doesn?t look as if there is a lip at either end and it seems as if it is just press fitted like the T-10?s are. Just want to make sure before I break out the tools.
Any help is appreciated???Don

Bill Belden · 04-19-2008, 08:32 AM

Don,
Your best bet is to call Jerico, and they will send you the right bushing

lasa · 04-19-2008, 09:37 AM

Hello Don. Call Jerico 1-704-782-4343, Ask for Scott he will answer any and all questions.

Don Fardie · 04-19-2008, 08:05 PM

Thanks Guys.........So much for firing off the car this weekend and making the Spring Neighborhood Hot Lap!!!!

Gary Smith · 04-23-2008, 07:21 AM

Quote:

Originally Posted by Don Fardie

Thanks Guys.........So much for firing off the car this weekend and making the Spring Neighborhood Hot Lap!!!!

...and I thought I was the only one LOL!!!!

04-18-2008, 09:35 PM	#1
Don Fardie Member Join Date: Feb 2003 Location: Lakeville, Ma Posts: 253 Likes: 0 Liked 0 Times in 0 Posts	Jerico Question Has anyone had to replace the bushing that is in the tail section of a DR-4. When installing my driveshaft today I noticed it was binding the farther I pushed it in to gain access to set the rear U-Joints. I ended up removing the tail section and noticed the bushing was wiped. I have a good idea what may have caused it, but not sure in which direction the bushing is removed. Doesn?t look as if there is a lip at either end and it seems as if it is just press fitted like the T-10?s are. Just want to make sure before I break out the tools. Any help is appreciated???Don __________________ Don Fardie 1582 F/S B/G

04-19-2008, 08:32 AM	#2
Bill Belden Member Join Date: Jun 2002 Location: York, PA Posts: 241 Likes: 0 Liked 1 Time in 1 Post	Re: Jerico Question Don, Your best bet is to call Jerico, and they will send you the right bushing __________________ Bill Belden Retired Stock Eliminator [emailSTK1100@comcast.net[/email]

04-19-2008, 09:37 AM	#3
lasa Junior Member Join Date: Jan 2007 Posts: 10 Likes: 0 Liked 0 Times in 0 Posts	Re: Jerico Question Hello Don. Call Jerico 1-704-782-4343, Ask for Scott he will answer any and all questions.

04-19-2008, 08:05 PM	#4
Don Fardie Member Join Date: Feb 2003 Location: Lakeville, Ma Posts: 253 Likes: 0 Liked 0 Times in 0 Posts	Re: Jerico Question Thanks Guys.........So much for firing off the car this weekend and making the Spring Neighborhood Hot Lap!!!! __________________ Don Fardie 1582 F/S B/G