HOME FORUM RULES CONTACT
     
   
   

Go Back   CLASS RACER FORUM > Class Racer Forums > Stock and Super Stock Tech
Reload this Page roller lifter
Register Photo Gallery FAQ Members List Calendar Mark Forums Read

Reply
 
Thread Tools Display Modes
Old 03-08-2023, 02:16 PM   #1
Weekend Racer
Junior Member
 
Join Date: Feb 2003
Location: P.Q.
Posts: 68
Likes: 1
Liked 1 Time in 1 Post
Default roller lifter
Hello! This is a sbc . New Jesel DLC coated pro-tie bar roller lifter .903 ,in Dart shp pro block with 55mm cam . I have an issue with the lifter .It Looks like it blocks the oil gallery off at Max lift .Has anyone noticed the same problem?
Weekend Racer is offline   Reply With Quote
Old 03-09-2023, 10:39 PM   #2
mike britt
Member
 
Join Date: Mar 2013
Location: Italy, Texas
Posts: 176
Likes: 367
Liked 66 Times in 31 Posts
Default Re: roller lifter
Given how much time the lifter spends at max lift how would that cause any issues? Less oil to the top is a good thing.
mike britt is offline   Reply With Quote
Old 03-10-2023, 10:04 AM   #3
Bob F
Junior Member
 
Join Date: Sep 2007
Location: Bucks Co Pa
Posts: 74
Likes: 17
Liked 16 Times in 11 Posts
Default Re: roller lifter
Base circle correct?
Bob F is offline   Reply With Quote
Old 03-10-2023, 10:49 AM   #4
Weekend Racer
Junior Member
 
Join Date: Feb 2003
Location: P.Q.
Posts: 68
Likes: 1
Liked 1 Time in 1 Post
Default Re: roller lifter
Quote:
Originally Posted by Bob F View Post
Base circle correct?
at cam base circle lifter oil band is well exposed to the oil gallery.
at .050 from max.lift the lifter oil band is no more exposed to the oil gallery. Thank!
Weekend Racer is offline   Reply With Quote
Old 03-10-2023, 02:06 PM   #5
Dirk Olson
Member
 
Join Date: Mar 2003
Posts: 199
Likes: 50
Liked 172 Times in 46 Posts
Default Re: roller lifter
Quote:
Originally Posted by Weekend Racer View Post
at cam base circle lifter oil band is well exposed to the oil gallery.
at .050 from max.lift the lifter oil band is no more exposed to the oil gallery. Thank!
A little line with a die grinder on the lifter oil hole will allow oil to flow, will not need much.
__________________
Dirk Olson 5036 STK
Dirk Olson is offline   Reply With Quote
Old 03-11-2023, 05:39 PM   #6
Weekend Racer
Junior Member
 
Join Date: Feb 2003
Location: P.Q.
Posts: 68
Likes: 1
Liked 1 Time in 1 Post
Default Re: roller lifter
Quote:
Originally Posted by Dirk Olson View Post
A little line with a die grinder on the lifter oil hole will allow oil to flow, will not need much.
These lifters had the lower edge of the oil band sitting higher than a “normal” lifter, and when the lifter was near the very top of the lobe, the band was no longer exposed to the gallery, and effectively shuts off the oil supply from that point forward. Also if I have to use a die grinder to make this lifter work,I understand this are not the lifter one I need !
There are few cheaper one that have the oil band well located. Thank you,
Weekend Racer is offline   Reply With Quote
Reply

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Hybrid Mode Hybrid Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 02:32 PM.

Class Racer - Top

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.