|
![]() |
#1 |
VIP Member
Join Date: Dec 2001
Location: Texarkana Ark/TX
Posts: 2,446
Likes: 575
Liked 880 Times in 311 Posts
|
![]()
What is allowed on Floor Board removal on Stick Shift SS??
Gen 3 Body...
__________________
Adger Smith (Former SS) |
![]() |
![]() |
![]() |
#2 |
VIP Member
Join Date: Mar 2007
Posts: 2,439
Likes: 611
Liked 1,908 Times in 573 Posts
|
![]()
As I remember its 6 sq ft.
__________________
Mike Pearson 2485 SS |
![]() |
![]() |
Liked |
![]() |
#3 |
Senior Member
Join Date: Jun 2011
Location: Langley (no igloos), British Columbia, Canada
Posts: 567
Likes: 306
Liked 278 Times in 86 Posts
|
![]()
Adger... It depends if you are referencing the East or West Rule Book. MB
|
![]() |
![]() |
Liked |
![]() |
#4 |
VIP Member
Join Date: Apr 2012
Location: Connecticut
Posts: 1,125
Likes: 1,179
Liked 684 Times in 289 Posts
|
![]()
Page 165 2020 Rulebook
|
![]() |
![]() |
![]() |
#5 |
VIP Member
Join Date: Feb 2014
Location: Lakewood Washington
Posts: 1,407
Likes: 29
Liked 237 Times in 126 Posts
|
![]()
Transmission tunnel is six square feet of removable material. Floorboard, that stuff under your feet, must be stock. It can be sectioned in the back for narrowed axles, but no removable stuff.
Secret hatches prohibited.
__________________
Dale Shearon 68 Mustang 6394 |
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: Mar 2002
Location: Woodburn, Or
Posts: 680
Likes: 79
Liked 791 Times in 241 Posts
|
![]() |
![]() |
![]() |
![]() |
#7 |
VIP Member
Join Date: Nov 2001
Location: The Lowcountry.
Posts: 2,954
Likes: 2,536
Liked 2,610 Times in 948 Posts
|
![]()
Same thing with the former Larry Perkins SS/AH 'Cuda. Not only was the floor removable but the dashboard as well.
|
![]() |
![]() |
![]() |
#8 |
VIP Member
Join Date: Dec 2001
Location: Texarkana Ark/TX
Posts: 2,446
Likes: 575
Liked 880 Times in 311 Posts
|
![]()
Well, since I'm not a current NHRA member I don't have access to a 2020 rule book. Sorry, but I'm having to rely on the brain trust here at Class Racer. I'm considering some change in direction with a Quay Gen 3 project I have.
Thanks for the answers they are sure helping.
__________________
Adger Smith (Former SS) |
![]() |
![]() |
![]() |
#9 |
VIP Member
Join Date: Apr 2012
Location: Connecticut
Posts: 1,125
Likes: 1,179
Liked 684 Times in 289 Posts
|
![]()
It says 6 Sq. ft.; 2x3,1x6...
Good luck with your project MJ |
![]() |
![]() |
![]() |
#10 |
VIP Member
Join Date: Jul 2008
Location: Liberty City [East Texas]
Posts: 1,760
Likes: 5
Liked 99 Times in 60 Posts
|
![]()
Adger, I am glad you are building the Camaro. I also have a Quay back half under construction.
__________________
Larry Woodfin 471W |
![]() |
![]() |
![]() |
|
|