Decking block

Kdw1403 · 11-03-2016, 05:50 PM

is it legal to zero deck a lt1 350 for stock eliminator? If not how much in the hole do I need to leave the piston.

richie 2 · 11-04-2016, 04:59 AM

I doubt it...nhra/ihra have that spec. & required head gasket thickness listed...

Rich Biebel · 11-04-2016, 07:42 AM

Total deck with gasket IIRC is .062"

If you had a zero deck you'd need a .062" thick gasket....

That's for a late model EFI LT-1...

The old LT-1's probably have a total deck number that would not be safe to run.....

Billy Nees · 11-04-2016, 07:54 AM

Quote:

Originally Posted by Rich Biebel

If you had a zero deck you'd need a .062" thick gasket....

And with the way that a head gasket usually overhangs the bore, the hot lick is to use the thinnest head gasket that you can and more negative deck.

Dwight Southerland · 11-04-2016, 10:38 AM

Quote:

Originally Posted by Billy Nees

And with the way that a head gasket usually overhangs the bore, the hot lick is to use the thinnest head gasket that you can and more negative deck.

Really??

Billy Nees · 11-04-2016, 12:03 PM

Quote:

Originally Posted by Billy Nees

And with the way that a head gasket usually overhangs the bore, the hot lick is to use the thinnest head gasket that you can and more negative deck.

I guess THAT didn't come out right.
And the way the head gasket usually IS LARGER THAN THE BORE IN DIAMETER, ETC.ETC.ETC.

Rich Biebel · 11-04-2016, 01:21 PM

Yes that's better Billy....

Ed Wright · 11-04-2016, 03:26 PM

What Billy said. Second time. LOL

Mark Yacavone · 11-04-2016, 03:49 PM

You want to order the gasket bore size AFTER you do the valve job...in the new NHRA.

Billy Nees · 11-04-2016, 05:38 PM

I can always count on my buddys to keep me on the straight and narrow!

11-03-2016, 05:50 PM	#1
Kdw1403 Member Join Date: Nov 2016 Posts: 206 Likes: 49 Liked 68 Times in 22 Posts	Decking block is it legal to zero deck a lt1 350 for stock eliminator? If not how much in the hole do I need to leave the piston.

11-04-2016, 04:59 AM	#2
richie 2 Senior Member Join Date: Feb 2009 Posts: 971 Likes: 426 Liked 205 Times in 93 Posts	Re: Decking block I doubt it...nhra/ihra have that spec. & required head gasket thickness listed...

11-04-2016, 07:42 AM	#3
Rich Biebel VIP Member Join Date: Jun 2007 Location: Northern New Jersey suburbs Posts: 2,314 Likes: 25 Liked 544 Times in 213 Posts	Re: Decking block Total deck with gasket IIRC is .062" If you had a zero deck you'd need a .062" thick gasket.... That's for a late model EFI LT-1... The old LT-1's probably have a total deck number that would not be safe to run..... __________________ Rich Biebel S/C 1479 Stock 147R Last edited by Rich Biebel; 11-04-2016 at 09:30 AM.

11-04-2016, 01:21 PM	#7
Rich Biebel VIP Member Join Date: Jun 2007 Location: Northern New Jersey suburbs Posts: 2,314 Likes: 25 Liked 544 Times in 213 Posts	Re: Decking block Yes that's better Billy.... __________________ Rich Biebel S/C 1479 Stock 147R

11-04-2016, 03:26 PM	#8
Ed Wright Veteran Member Join Date: Mar 2005 Location: Sand Springs, OK Posts: 8,132 Likes: 896 Liked 390 Times in 170 Posts	Re: Decking block What Billy said. Second time. LOL __________________ Ed Wright 4156 SS/JA

11-04-2016, 03:49 PM	#9
Mark Yacavone Veteran Member Join Date: Mar 2002 Location: Miles From Nowhere Posts: 7,817 Likes: 2,907 Liked 5,124 Times in 1,953 Posts	Re: Decking block You want to order the gasket bore size AFTER you do the valve job...in the new NHRA. __________________ "We are lucky we don't get as much Government as we pay for." Will Rogers

11-04-2016, 05:38 PM	#10
Billy Nees VIP Member Join Date: Oct 2002 Location: On a hilltop in Pa. Posts: 4,495 Likes: 3,600 Liked 7,742 Times in 1,740 Posts	Re: Decking block I can always count on my buddys to keep me on the straight and narrow! __________________ Billy Nees 1188 STK, SS I'm not spending 100K to win 2K