Super Stock Interiors

cutta · 03-23-2014, 11:24 AM

What original equipment and body panel are required (ie door panels, side arm rests, dash etc) ? Thanks

FireSale · 03-23-2014, 12:03 PM

It's in the rule book. I could give you the info, but you will be better off to read it on your own.

Dale

HandOverFist · 03-23-2014, 12:38 PM

FireSale · 03-23-2014, 03:29 PM

Don'r forget the floor and instrument panel. but still read the book...

FLOOR
Removable floor section for transmission/shifter installation
permitted; restricted to 6 square feet (2 x 3 feet, 1 x 6 feet, etc.)
of steel material identical to area removed. Stock floor may be
sectioned where rear framerails have been narrowed. Area
between framerails must be stock floor, in original location. Area
between new rear framerails (from four-link crossmember
rearward only) and body may be replaced with material equal to
or heavier than original; must be in original location. All other
floor material must be stock and in original location. See General
Regulations 7:5.

STREET EQUIPMENT
The following are not required and may be removed: emission
controls; windshield-wiper blades, arms, and motor; heater/air
conditioning and associated plumbing (controls must remain in
dash, see INSTRUMENTS). Turn signals, etc. need not be
operative. One working headlight and one working taillight
mandatory.

INSTRUMENTS
Full stock dashboard, including instruments, fresh-air ducts, and
controls, must be retained. Heaters/air conditioners may be
removed; controls must remain in dashboard. Tachometer,
pressure gauges, etc. optional. See General Regulations 8:8.

Dale

03-23-2014, 11:24 AM	#1
cutta Member Join Date: Jul 2008 Location: Little Rock, AR Posts: 347 Likes: 0 Liked 5 Times in 2 Posts	Super Stock Interiors What original equipment and body panel are required (ie door panels, side arm rests, dash etc) ? Thanks __________________ Adriel Paradise, Paradise Racing Team Driver/Crew Chief(at least my dad claims me to be) B.S. Mechanical Engineering, University of Arkansas

03-23-2014, 12:03 PM	#2
FireSale VIP Member Join Date: Feb 2014 Location: Lakewood Washington Posts: 1,407 Likes: 29 Liked 237 Times in 126 Posts	Re: Super Stock Interiors It's in the rule book. I could give you the info, but you will be better off to read it on your own. Dale __________________ Dale Shearon 68 Mustang 6394

03-23-2014, 12:38 PM	#3
HandOverFist VIP Member Join Date: Oct 2013 Location: Gulf Breeze, FL Posts: 1,651 Likes: 8 Liked 33 Times in 16 Posts	Re: Super Stock Interiors __________________ Rich Taylor I/SA - 321

03-23-2014, 03:29 PM	#4
FireSale VIP Member Join Date: Feb 2014 Location: Lakewood Washington Posts: 1,407 Likes: 29 Liked 237 Times in 126 Posts	Re: Super Stock Interiors Don'r forget the floor and instrument panel. but still read the book... FLOOR Removable floor section for transmission/shifter installation permitted; restricted to 6 square feet (2 x 3 feet, 1 x 6 feet, etc.) of steel material identical to area removed. Stock floor may be sectioned where rear framerails have been narrowed. Area between framerails must be stock floor, in original location. Area between new rear framerails (from four-link crossmember rearward only) and body may be replaced with material equal to or heavier than original; must be in original location. All other floor material must be stock and in original location. See General Regulations 7:5. STREET EQUIPMENT The following are not required and may be removed: emission controls; windshield-wiper blades, arms, and motor; heater/air conditioning and associated plumbing (controls must remain in dash, see INSTRUMENTS). Turn signals, etc. need not be operative. One working headlight and one working taillight mandatory. INSTRUMENTS Full stock dashboard, including instruments, fresh-air ducts, and controls, must be retained. Heaters/air conditioners may be removed; controls must remain in dashboard. Tachometer, pressure gauges, etc. optional. See General Regulations 8:8. Dale __________________ Dale Shearon 68 Mustang 6394 Last edited by FireSale; 03-23-2014 at 03:31 PM.