|
![]() |
#1 |
Junior Member
Join Date: Sep 2011
Location: Belmont ohio
Posts: 20
Likes: 47
Liked 0 Times in 0 Posts
|
![]()
Simple question to anyone that may know the answer. Are drag radials legal in stock eliminator and if so are there size requirements. Are you limited to a 235 or 255 or 275 etc. any input would be greatly appreciated.
Mike Fowkes |
![]() |
![]() |
![]() |
#2 |
Junior Member
Join Date: Aug 2012
Posts: 81
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
Yes they are. We have to use a 9in slick. So whatever you measure across on your drag radial, make sure it doesn't go past that.
I forget the exact measurement that NHRA placed in their rule book. I think it was 9.5 across max including wear? |
![]() |
![]() |
![]() |
#3 |
Senior Member
Join Date: Apr 2004
Location: RacerTees.com
Posts: 505
Likes: 0
Liked 4 Times in 2 Posts
|
![]()
There are a few running the 275 street radial.
__________________
Lee Norton - N229 STK IHRA H/FIA - NHRA O/SA RacerTees.com |
![]() |
![]() |
![]() |
#4 |
VIP Member
Join Date: Nov 2009
Location: Egg Harbor Township, NJ
Posts: 1,468
Likes: 1,446
Liked 4,365 Times in 501 Posts
|
![]()
I asked about this for a whole year and no one had a clear answer. They will get the tape measure out for the 235/255/275 but not for anything that says 9" on the side, where you can clearly see stocker tires being stretched to 10+ inches. Run at your own risk. I had to settle on a bias play 28x9 for my stocker because I couldn't fit the traditional 30x9 radial under it.
|
![]() |
![]() |
![]() |
#5 |
Junior Member
Join Date: Sep 2011
Location: Belmont ohio
Posts: 20
Likes: 47
Liked 0 Times in 0 Posts
|
![]()
Thank you for responding. I figured it was a gray area as with most of stock
|
![]() |
![]() |
![]() |
|
|