|
|
![]() |
#1 |
Member
Join Date: Oct 2008
Location: Surrey B.C.
Posts: 135
Likes: 3
Liked 5 Times in 5 Posts
|
![]()
I have a 1050 dominator with a loose booster. It falls right out if you tip the carb upside down. What is the best way to repair this? It doesn't look damaged. Thanks in advance.
Dave
__________________
6535 stk 81 Malibu K/SA |
![]() |
![]() |
![]() |
#2 |
VIP Member
Join Date: Jun 2006
Posts: 3,418
Likes: 523
Liked 332 Times in 180 Posts
|
![]()
small pin punch and "gently stake it " into position
|
![]() |
![]() |
![]() |
#3 |
Member
Join Date: Aug 2010
Location: CT
Posts: 457
Likes: 1,796
Liked 347 Times in 151 Posts
|
![]()
there should be a brass tube inserted into the booster through the body of the carb - if it's loose or missing they are easily replaced.
__________________
Phil Molski PMR Performance S/C 1623 |
![]() |
![]() |
![]() |
#4 |
Member
Join Date: Oct 2008
Location: Surrey B.C.
Posts: 135
Likes: 3
Liked 5 Times in 5 Posts
|
![]()
thanks for the responses guys. Quick update, I dissassembled the carb and there was no tube through the main body holding the booster in place on any of them. I then took a small auto center punch and carefully punched a series of them in the booster and the carb body where it presses in. I then tapped the booster in place and it is good as new.
Dave
__________________
6535 stk 81 Malibu K/SA |
![]() |
![]() |
![]() |
#5 |
Junior Member
Join Date: Apr 2008
Posts: 83
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
They need to have booster pins/ booster stake tubes in them. You can get them from BLP, ask for the .160 ID pins, they are not expensive. I use a 1/4 brass punch to drive them in. You really need them, they set the passage diameter to the booster. It will run without them, but not as well.
|
![]() |
![]() |
![]() |
#6 |
Member
Join Date: Oct 2008
Location: Surrey B.C.
Posts: 135
Likes: 3
Liked 5 Times in 5 Posts
|
![]()
Thanks for responding. Why would they be missing? Would someone take them out or do they not come from the factory with them? Who is BLP?
__________________
6535 stk 81 Malibu K/SA |
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: Oct 2008
Location: Lynden ,WA
Posts: 820
Likes: 0
Liked 3 Times in 3 Posts
|
![]()
You can't run that carb on the stocker Dave
__________________
2009 V/SA Record Holder |
![]() |
![]() |
![]() |
#8 | |
Junior Member
Join Date: Apr 2008
Posts: 83
Likes: 0
Liked 0 Times in 0 Posts
|
![]() Quote:
BLP. http://blp.com/cart/index.php?main_p...roducts_id=372 |
|
![]() |
![]() |
![]() |
|
|