82-92 Pinion Angle

Chad Rhodes · 07-02-2010, 10:05 PM

Any suggestions for a starting point on an 82-92 F-body Stocker

Billy Nees · 07-03-2010, 06:28 AM

That would depend on whether you are using the torque arm or the lower arm "ladderbar".
With the torque arm you will need less angle.

Chad Rhodes · 07-03-2010, 08:23 AM

Quote:

Originally Posted by Billy Nees

That would depend on whether you are using the torque arm or the lower arm "ladderbar".
With the torque arm you will need less angle.

its got a torque arm, not a stock one though obviously

Billy Nees · 07-03-2010, 08:51 AM

If it's an adjustable arm , I would start with the same angle as the trans to driveshaft angle. With that long an arm you don't need much. If your trans to driveshaft is nil then I would go with about 2 or 3 down.

Chad Rhodes · 07-03-2010, 09:07 AM

thanks

07-02-2010, 10:05 PM	#1
Chad Rhodes VIP Member Join Date: Jan 2005 Location: Where the Green Grass Grows, AL Posts: 2,375 Likes: 0 Liked 3 Times in 3 Posts	82-92 Pinion Angle Any suggestions for a starting point on an 82-92 F-body Stocker __________________ Chad Rhodes 2113 I/SA

07-03-2010, 06:28 AM	#2
Billy Nees VIP Member Join Date: Oct 2002 Location: On a hilltop in Pa. Posts: 4,496 Likes: 3,600 Liked 7,749 Times in 1,741 Posts	Re: 82-92 Pinion Angle That would depend on whether you are using the torque arm or the lower arm "ladderbar". With the torque arm you will need less angle. __________________ Billy Nees 1188 STK, SS I'm not spending 100K to win 2K

07-03-2010, 08:51 AM	#4
Billy Nees VIP Member Join Date: Oct 2002 Location: On a hilltop in Pa. Posts: 4,496 Likes: 3,600 Liked 7,749 Times in 1,741 Posts	Re: 82-92 Pinion Angle If it's an adjustable arm , I would start with the same angle as the trans to driveshaft angle. With that long an arm you don't need much. If your trans to driveshaft is nil then I would go with about 2 or 3 down. __________________ Billy Nees 1188 STK, SS I'm not spending 100K to win 2K

07-03-2010, 09:07 AM	#5
Chad Rhodes VIP Member Join Date: Jan 2005 Location: Where the Green Grass Grows, AL Posts: 2,375 Likes: 0 Liked 3 Times in 3 Posts	Re: 82-92 Pinion Angle thanks __________________ Chad Rhodes 2113 I/SA