Jerico Trans mount

Dwight Southerland · 03-21-2010, 07:22 AM

I am working out the installation of a Jerico that would be simplified to use a mounting location on the tailhousing that is drilled for a mount that is drilled with 2 3/4" c-to-c holes. I have looked at many trans mounts at my local Advance Auto, but have found none that have this measurement that are usable. I'm sure that Jerico included that postion and dimension to match some factory part and spec, but I have been unable to find the application. Anybody have an idea what it would be?

Bob Gullett · 03-21-2010, 08:37 AM

This is the one I use on my Jerico
http://www.summitracing.com/parts/EN...n/?prefilter=1

REGGIE WINKLES · 03-21-2010, 09:36 AM

Dwight, I also use the Energy Suspension mount. I have hundreds of passes without a failure.

Sam Murray · 03-22-2010, 03:33 PM

Dwight,

Stock turbo four hundred mount works great. Plenty of support last for years.

Sam

Dwight Southerland · 03-23-2010, 12:40 PM

From the replies, I don't think I explained myself well, so here is a picture. I need to know what mount will fit in the location in the photo. The c-to-c on the bolt holes is 2 3/4". I have a TH400 mount, but it fits the wider pattern.

Tom keedle · 03-23-2010, 03:35 PM

350 turbo maybe?
don't have one handy or i'd measure it for ya.
seems to me there's a 400 mount with those dimensions but i don't remember what the ap was...

03-21-2010, 07:22 AM	#1
Dwight Southerland VIP Member Join Date: Dec 2001 Location: Arkansas - In the middle of everything. Posts: 1,999 Likes: 63 Liked 772 Times in 192 Posts	Jerico Trans mount I am working out the installation of a Jerico that would be simplified to use a mounting location on the tailhousing that is drilled for a mount that is drilled with 2 3/4" c-to-c holes. I have looked at many trans mounts at my local Advance Auto, but have found none that have this measurement that are usable. I'm sure that Jerico included that postion and dimension to match some factory part and spec, but I have been unable to find the application. Anybody have an idea what it would be? Last edited by Dwight Southerland; 03-21-2010 at 07:23 AM. Reason: Spelling

03-21-2010, 08:37 AM	#2
Bob Gullett VIP Member Join Date: Mar 2002 Posts: 1,099 Likes: 56 Liked 461 Times in 111 Posts	Re: Jerico Trans mount This is the one I use on my Jerico http://www.summitracing.com/parts/EN...n/?prefilter=1 __________________ 68 Chevy11 327 F/S

03-21-2010, 09:36 AM	#3
REGGIE WINKLES Member Join Date: Jun 2007 Location: St. Augustine, Fla. Posts: 229 Likes: 558 Liked 39 Times in 9 Posts	Re: Jerico Trans mount Dwight, I also use the Energy Suspension mount. I have hundreds of passes without a failure. __________________ Reggie Winkles 2650/Stock

03-22-2010, 03:33 PM	#4
Sam Murray Member Join Date: Jul 2002 Location: Cummaquid, Mass Posts: 444 Likes: 408 Liked 60 Times in 29 Posts	Re: Jerico Trans mount Dwight, Stock turbo four hundred mount works great. Plenty of support last for years. Sam __________________ Sam Murray 1616 STK

03-23-2010, 12:40 PM	#5
Dwight Southerland VIP Member Join Date: Dec 2001 Location: Arkansas - In the middle of everything. Posts: 1,999 Likes: 63 Liked 772 Times in 192 Posts	Re: Jerico Trans mount From the replies, I don't think I explained myself well, so here is a picture. I need to know what mount will fit in the location in the photo. The c-to-c on the bolt holes is 2 3/4". I have a TH400 mount, but it fits the wider pattern.

03-23-2010, 03:35 PM	#6
Tom keedle Senior Member Join Date: Dec 2008 Location: Berthoud, Coloraduh Posts: 695 Likes: 13 Liked 8 Times in 7 Posts	Re: Jerico Trans mount 350 turbo maybe? don't have one handy or i'd measure it for ya. seems to me there's a 400 mount with those dimensions but i don't remember what the ap was...