M&H slick mounting question

Tom keedle · 01-24-2010, 10:29 AM

is there a right and a left?
if so, how do you tell?
last set of slicks i owned had arrows....

fwiw, they're 8.5-26-15

Tom keedle · 01-24-2010, 01:38 PM

80 views and NOBODY knows!?!?

Bill Belden · 01-24-2010, 01:41 PM

If they are directional they would have small arrows pointing the direction of rotation

Tom keedle · 01-24-2010, 02:12 PM

thanks bill.

btw, it'd help if i could read....
they're mickey thompsons rather than M&H's...

and M/T's website confirmed what you say...

GTX JOHN · 01-24-2010, 03:43 PM

I had a set of M/T that size about 4 yrs. ago.... there was a molding number on only one side of side wall. I was told to put the molding number towards the outside of car on both sides. Compare both sides of each tire and see if you can find it! John Irving

Jim Wahl · 01-25-2010, 02:40 AM

I don't know if this will be of any help to you but I ran M/T tires on all my FWD cars and they were not unidirectional. In fact I found changing them from left to fight every 15 to 20 passes extended the life of the tires. Jim

01-24-2010, 10:29 AM	#1
Tom keedle Senior Member Join Date: Dec 2008 Location: Berthoud, Coloraduh Posts: 695 Likes: 13 Liked 8 Times in 7 Posts	M&H slick mounting question is there a right and a left? if so, how do you tell? last set of slicks i owned had arrows.... fwiw, they're 8.5-26-15

01-24-2010, 01:38 PM	#2
Tom keedle Senior Member Join Date: Dec 2008 Location: Berthoud, Coloraduh Posts: 695 Likes: 13 Liked 8 Times in 7 Posts	Re: M&H slick mounting question 80 views and NOBODY knows!?!?

01-24-2010, 01:41 PM	#3
Bill Belden Member Join Date: Jun 2002 Location: York, PA Posts: 241 Likes: 0 Liked 1 Time in 1 Post	Re: M&H slick mounting question If they are directional they would have small arrows pointing the direction of rotation __________________ Bill Belden Retired Stock Eliminator [emailSTK1100@comcast.net[/email]

01-24-2010, 02:12 PM	#4
Tom keedle Senior Member Join Date: Dec 2008 Location: Berthoud, Coloraduh Posts: 695 Likes: 13 Liked 8 Times in 7 Posts	Re: M&H slick mounting question thanks bill. btw, it'd help if i could read.... they're mickey thompsons rather than M&H's... and M/T's website confirmed what you say...

01-24-2010, 03:43 PM	#5
GTX JOHN VIP Member Join Date: Jun 2009 Location: Boulder City, Nevada 89005 Posts: 2,733 Likes: 2,799 Liked 2,483 Times in 697 Posts	Re: M&H slick mounting question I had a set of M/T that size about 4 yrs. ago.... there was a molding number on only one side of side wall. I was told to put the molding number towards the outside of car on both sides. Compare both sides of each tire and see if you can find it! John Irving

01-25-2010, 02:40 AM	#6
Jim Wahl Veteran Member Join Date: Jan 2002 Location: Central Florida Posts: 5,844 Likes: 666 Liked 683 Times in 129 Posts	Re: M&H slick mounting question I don't know if this will be of any help to you but I ran M/T tires on all my FWD cars and they were not unidirectional. In fact I found changing them from left to fight every 15 to 20 passes extended the life of the tires. Jim __________________ Jim Wahl....NHRA #2239 S/SS - IHRA # 8 Stock, D2 Stock Champion (forever I guess) 2019 Baby Gators Stock Champion 2009 NHRA D2 National Open Stock Champion 1982 NHRA D2 West Palm Beach LDRS SS Runner Up Past President, Southern Stock / Super Stock Association.