Browell Bellhousing Alignment Tool

Dave Toce · 01-16-2010, 08:56 PM

Anybody who has dialed in a bellhousing knows it is a real pain. I am putting a new motor in the car this winter and a friend of mine tells me to borrow his Browell bellhousing alignment tool to get the bellhousing indexed properly. Holy crap in 15 minutes I had the bellhousing all indexed. This tool hits it out of the park in my opinion.

You bolt the locating fixture on the crank, bolt up the bellhousing, then slide the black collar to try to slide it into the bellhousing center hole. If it slides in then you are good, if not use some offset dowels to be able to slide the collar in the center hole.

Ed Carpenter · 01-16-2010, 11:18 PM

I have it and it's awesome.

Bob Gullett · 01-17-2010, 12:44 AM

How much?

Dave Toce · 01-17-2010, 07:49 AM

Quote:

Originally Posted by Bob Gullett

How much?

I think it is around $150 which seems like quite a bit but you don't know how worth it that is until you use it.

Tom keedle · 01-17-2010, 08:18 AM

WHERE do you get one?

Dave Toce · 01-17-2010, 12:38 PM

Quote:

Originally Posted by tomslik

WHERE do you get one?

Here: http://www.browellbellhousing.com/

01-16-2010, 08:56 PM	#1
Dave Toce Junior Member Join Date: Aug 2004 Posts: 34 Likes: 2 Liked 0 Times in 0 Posts	Browell Bellhousing Alignment Tool Anybody who has dialed in a bellhousing knows it is a real pain. I am putting a new motor in the car this winter and a friend of mine tells me to borrow his Browell bellhousing alignment tool to get the bellhousing indexed properly. Holy crap in 15 minutes I had the bellhousing all indexed. This tool hits it out of the park in my opinion. You bolt the locating fixture on the crank, bolt up the bellhousing, then slide the black collar to try to slide it into the bellhousing center hole. If it slides in then you are good, if not use some offset dowels to be able to slide the collar in the center hole.

01-16-2010, 11:18 PM	#2
Ed Carpenter Live Reporter Join Date: May 2006 Location: Dripping Springs, Tx Posts: 2,709 Likes: 186 Liked 520 Times in 132 Posts	Re: Browell Bellhousing Alignment Tool I have it and it's awesome. __________________ Ed Carpenter 2005 Chevy Cobalt A/SM Race Engine Development

01-17-2010, 12:44 AM	#3
Bob Gullett VIP Member Join Date: Mar 2002 Posts: 1,099 Likes: 56 Liked 461 Times in 111 Posts	Re: Browell Bellhousing Alignment Tool How much? __________________ 68 Chevy11 327 F/S

01-17-2010, 08:18 AM	#5
Tom keedle Senior Member Join Date: Dec 2008 Location: Berthoud, Coloraduh Posts: 695 Likes: 13 Liked 8 Times in 7 Posts	Re: Browell Bellhousing Alignment Tool WHERE do you get one?