|
![]() |
#1 |
Junior Member
Join Date: Oct 2008
Location: Clovis, CA
Posts: 13
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
Any of ya'll have a galley of pics showing the process of backhalfing one of these cars. I am knee deep in taking out all the interior and need some guidance. I am looking for 4-link dropped crossmember position and frame rail connections......Thanx
|
![]() |
![]() |
![]() |
#2 |
Junior Member
Join Date: Oct 2004
Location: Vacherie, LA
Posts: 63
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
Go Ed Quay all the way. We just recently finished a future superstocker('85 camaro) with a Quay kit and it couldn't have been easier. The kit even came with instructions. I'll see if the owner wants to post any pics...
|
![]() |
![]() |
![]() |
#3 |
Junior Member
Join Date: Oct 2008
Location: Clovis, CA
Posts: 13
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
Ed and I have talked a few times about his stuff....most enjoyable person with great looking stuff. I have several parts on my list that are his.....Pics would be most welcome...thanx
|
![]() |
![]() |
![]() |
#4 |
Member
Join Date: Jan 2003
Posts: 180
Likes: 45
Liked 30 Times in 15 Posts
|
![]()
I built my Firebird from a Ed Quay kit and have hundreds of photos if there is anything i can do to help.Starting with a straight rust free is very important.
let me know. greg meyer |
![]() |
![]() |
![]() |
#5 |
Junior Member
Join Date: Oct 2008
Location: Clovis, CA
Posts: 13
Likes: 0
Liked 0 Times in 0 Posts
|
![]()
Thanx Greg, do you have any showing the 4-link crossmember install area? Mostly where and how it was installed.....
|
![]() |
![]() |
![]() |
#6 |
Member
Join Date: Jan 2003
Posts: 180
Likes: 45
Liked 30 Times in 15 Posts
|
![]()
If you are talking about a cross member from side to side Quey doesn't use one.
Send my your e-mail address and i will get some pics coming your way. |
![]() |
![]() |
![]() |
|
|