|
06-09-2011, 09:43 AM | #1 |
Junior Member
Join Date: Nov 2009
Location: Ottawa, Ont
Posts: 68
Likes: 1
Liked 0 Times in 0 Posts
|
Free-wheeling hubs-old style towing
Hey guys,
My car is close to ready to get some racing in this year. I really don't want to drive it to the track anymore and I might not be able to get insurance on the car due to roll cage etc... I am bucks down right now so I can't afford to buy a decent open car trailer. I recall back in the days people used to "flat tow" their cars. They had a "free wheeling hubs" attached to a suitable tow vehicle with a tow bar. I can't seem to find these hubs anymore, but after talking to some people I think I could make some. I would remove a front drum application off a GM A-body (to get the hubs) and make some mounting plates (1/2 steel). I would also construct some type of tow bar... I would need to find a small thin tire that would act as the wheels for the hub..I also don't have a e-brake anymore due to c-clip elims install.. Hopefully there are some guys out there who did this back in the day and can give me some advice.. Thanks, Kris
__________________
http://www.youtube.com/watch?v=h2qQX4TDTVU |
06-09-2011, 10:43 AM | #2 |
Member
Join Date: Mar 2007
Location: Valley Stream mini Gasoline Alley & Div I
Posts: 100
Likes: 25
Liked 52 Times in 16 Posts
|
Re: Free-wheeling hubs-old style towing
I may have two sets in my ex mother in laws garage. For Large bolt pattern chrysler , ford also have tow bar. Make me a reasonable offer and pay for shipping. These are cool because they have one hole bored to make R&R easy you just have to drill a hole into the tow wheels you will be using.
Mike |
06-09-2011, 12:41 PM | #3 |
Junior Member
Join Date: Nov 2009
Location: Ottawa, Ont
Posts: 68
Likes: 1
Liked 0 Times in 0 Posts
|
Re: Free-wheeling hubs-old style towing
Cool! I have the GM 4.75 bolt pattern with 1/2 studs. Can I assume the "large" Chrysler pattern is 4.5? Could I just drill out the holes a addition 1/4 inch to make them work?
If so, I am very interested!
__________________
http://www.youtube.com/watch?v=h2qQX4TDTVU |
06-09-2011, 01:22 PM | #4 |
Member
Join Date: Mar 2007
Location: Valley Stream mini Gasoline Alley & Div I
Posts: 100
Likes: 25
Liked 52 Times in 16 Posts
|
Re: Free-wheeling hubs-old style towing
no i don't think they will work out for you. I'd rather see you find the 4.75 bolt pattern. I'd hate to hear that you had a towing mishap. There out there keep looking.
Mike |
06-09-2011, 02:47 PM | #5 |
Junior Member
Join Date: Nov 2009
Location: Ottawa, Ont
Posts: 68
Likes: 1
Liked 0 Times in 0 Posts
|
Re: Free-wheeling hubs-old style towing
Thanks Mike,
I found a old post on here from a few years ago with a guy (Ronnie Hamlin) who might have some for sale...I will e-mail him and see..OR I can make them myself. I know of a front wheel drum setup in a pick-a-part yard. KP
__________________
http://www.youtube.com/watch?v=h2qQX4TDTVU Last edited by Kris Kristofferson; 06-09-2011 at 03:59 PM. |
07-07-2011, 08:27 PM | #6 |
Member
Join Date: Jan 2009
Location: Carleton Place, On. Canada
Posts: 107
Likes: 5
Liked 0 Times in 0 Posts
|
Re: Free-wheeling hubs-old style towing
I used those for years on my different stockers before I got a trailer, I just sold them this spring. We have e brakes on the Nova and my 57 wagon with C clip eliminators.
__________________
old 1608 stock racer Last edited by henrys57wagon; 07-07-2011 at 08:30 PM. |
07-28-2011, 03:46 PM | #7 |
Member
Join Date: Oct 2008
Location: Happy Valley, OR
Posts: 260
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Free-wheeling hubs-old style towing
Back in the days of towbars I always wondered why people didn't use RV-style tow dollies, with the car on it backwards and the steering locked straight ahead? I was planning to get one, but eventually bought a truck and trailer.
__________________
Michael Pliska 643 S/G |
08-02-2011, 09:20 AM | #8 |
Junior Member
Join Date: Jul 2011
Posts: 6
Likes: 0
Liked 0 Times in 0 Posts
|
Re: Free-wheeling hubs-old style towing
I have been looking for a set of tow hubs or some how to on making them. Did you have any luck finding or making any?
|
09-08-2011, 09:50 PM | #9 |
Member
Join Date: Dec 2009
Location: Kingman, NW AZ. in the middle of the longest stretch of Route 66
Posts: 308
Likes: 0
Liked 17 Times in 13 Posts
|
Re: Free-wheeling hubs-old style towing
i would really lean toward a tow dolly. the free wheeling hubs will only work with certain body styles. with a tow dolly, back the car on the unit, lock the steering wheel straight and go. when home the dolly can be stood straight up and save space. i towed all around the mid west with a tow bar, and would never ever do that again. tow bars are dangerous when raining [don't ask how i know] are hard to back up and have to be designed just right or they will not track.
with the free wheelin' hubs you still have to have the front wheels on the ground, you still have to have a tow ball and light wires. plus all the time to change tires commin' and goin'. all in all the tow dolly is best hands down. rod in AZ |
09-09-2011, 06:02 PM | #10 |
Senior Member
Join Date: Apr 2010
Location: Island of high taxes, N.Y.
Posts: 541
Likes: 0
Liked 1 Time in 1 Post
|
Re: Free-wheeling hubs-old style towing
The towing hubs you are talking about are free wheeling hubs and were made by NMW, the same manufacturer of ladder bars for coil spring cars. Try looking on Ebay or put in a classified on Craigslist. You could try locating the manufacturer or whoever bought out his stock. If you really want it ---take a shot !
|
|
|