|
05-12-2020, 11:24 AM | #1 |
Member
Join Date: Feb 2018
Location: West Layfayette
Posts: 105
Likes: 159
Liked 40 Times in 18 Posts
|
Stock Eliminator Rods
How many runs do you normally put on a set of H beam rods before changing them out?
|
Liked |
05-12-2020, 01:59 PM | #2 |
VIP Member
Join Date: Jun 2009
Location: Boulder City, Nevada 89005
Posts: 2,550
Likes: 2,249
Liked 1,909 Times in 585 Posts
|
Re: Stock Eliminator Rods
A bunch.....I run aftermarket rods and
have some shortblocks in my bracket car that the rods have 10 Seasons and 1000 passes. I check bearings and do a valve job around 250 to 300 runs I run Race Rings in a lot of my cars (Gregg Luneauk) from TriCity Performance = I ran 1000+ passes on them and they still leaked down pretty decent! Currently 400 plus in my O/SA Aspen Wagon on Rings and probably 800 on the Rods or more! Your Mileage may vary!!
__________________
John Irving 741 Stock 741 Super Stock |
Liked |
05-12-2020, 03:41 PM | #3 |
VIP Member
Join Date: Feb 2003
Location: Glendale, Arizona
Posts: 2,996
Likes: 693
Liked 1,465 Times in 547 Posts
|
Re: Stock Eliminator Rods
During a refresh, check the big end and small end dimensions and if replace the bolts every 4 engine refresh.
|
05-12-2020, 08:34 PM | #4 |
VIP Member
Join Date: Nov 2002
Location: Massapequa Park,NY
Posts: 1,215
Likes: 1,747
Liked 827 Times in 269 Posts
|
Re: Stock Eliminator Rods
Also magnaflux rods when rebuilding.
__________________
1989 Camaro Iroc-Z I/SA B&B Auto Machine Shop. |
Liked |
Thread Tools | |
Display Modes | |
|
|