|
|
![]() |
#1 |
Member
Join Date: Nov 2016
Posts: 209
Likes: 50
Liked 68 Times in 22 Posts
|
![]()
My data logger on my fast system shows my TPS is not at 100% during some of my bad runs. The O 2 reading will show very very lean when this happens. Can I get a new stock TPS from parts store and put on?
|
![]() |
![]() |
![]() |
#2 |
VIP Member
Join Date: Nov 2009
Location: Egg Harbor Township, NJ
Posts: 1,474
Likes: 1,469
Liked 4,390 Times in 506 Posts
|
![]()
If it is GM I am pretty sure you can pick that up at the parts house. What system are you running? Pull it off the throttle body and see if the plastic is all chewed up. If it is loose and vibrating going downtrack you will get erratic readings and that will be detrimental to the performance, especially in Alpha N mode.
|
![]() |
![]() |
![]() |
#3 |
Member
Join Date: Nov 2016
Posts: 209
Likes: 50
Liked 68 Times in 22 Posts
|
![]()
Fast xfi2.0. I’ll take it off and check. Thanks
|
![]() |
![]() |
![]() |
#4 |
Live Reporter
Join Date: Oct 2004
Location: Hickory, Ky
Posts: 10,685
Likes: 1,994
Liked 11,032 Times in 2,267 Posts
|
![]()
Fast web site lists those parts
|
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Nov 2003
Location: Donaldsonville, LA
Posts: 984
Likes: 17
Liked 229 Times in 71 Posts
|
![]()
I would recommend using an OEM TPS sensor. What is the application? Have you learned the tps sensor?
__________________
Jimmy "Cooter" Hidalgo, Jr. 4865 E/SA '04 GTO 4865 SS/GA '99 Firebird |
![]() |
![]() |
![]() |
#6 |
Member
Join Date: Nov 2016
Posts: 209
Likes: 50
Liked 68 Times in 22 Posts
|
![]()
I just bought a TPS. Do I just install it or as you say do I have to calibrate it or learn it? Your car was flying in St. Louis.
|
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|