|
![]() |
#1 |
Junior Member
Join Date: Jul 2016
Location: NW Iowa
Posts: 42
Likes: 1
Liked 3 Times in 1 Post
|
![]()
Can someone tell me if you are required to run a back seat in Stock Eliminator ? Can you run a mini tub as well ?
|
![]() |
![]() |
![]() |
#2 |
VIP Member
Join Date: Oct 2007
Posts: 1,168
Likes: 487
Liked 346 Times in 126 Posts
|
![]() |
![]() |
![]() |
![]() |
#3 |
VIP Member
Join Date: Mar 2010
Location: Newport News, VA
Posts: 1,435
Likes: 371
Liked 129 Times in 59 Posts
|
![]()
If you install a roll-bar or -cage, and if you're running any stock class "M" or above you're required to do so, you can remove the rear seat. You have to carpet the area where the seat was installed to finish the installation.
As David mentioned, modifying the inner wheel-wells with a "mini-tub" is prohibited, although you may be able to gently "massage" certain areas to get enough clearance.
__________________
Lew Silverman #2070 "The Wagon Master" N/SA |
![]() |
![]() |
![]() |
#4 |
VIP Member
|
![]()
You shouldn`t need to mini tub much anyway. You`re only allowed a 9" wide slick.
__________________
Lane Weber It`s Not What You Drive That Wins....It`s How You Drive It |
![]() |
![]() |
![]() |
#5 |
Junior Member
Join Date: Jul 2016
Location: NW Iowa
Posts: 42
Likes: 1
Liked 3 Times in 1 Post
|
![]()
Thanks guys, I bought an 68 Camaro ex stock eliminator car with no motor. I have pictures of the car running in Stock. My car is mini tubed and has no back seat but it's all finished off with carpet. It ran in IHRA G/CM. We have installed a small block 400 in the car to get some seat time with the car first. Our goal is to race Stock. All input would be appreciated.
|
![]() |
![]() |
![]() |
#6 |
Member
Join Date: Aug 2002
Location: Florida
Posts: 103
Likes: 79
Liked 12 Times in 6 Posts
|
![]()
If you run in a class lower than M and don't need a roll bar but you run a fuel cell and need a fire wall do you still need a back seat?
|
![]() |
![]() |
![]() |
#7 |
VIP Member
Join Date: May 2002
Location: Shelby, NC
Posts: 1,817
Likes: 2,153
Liked 2,336 Times in 549 Posts
|
![]()
The IHRA allows mini tubs. The NHRA doesn't.
|
![]() |
![]() |
![]() |
#8 |
VIP Member
Join Date: Mar 2010
Location: Newport News, VA
Posts: 1,435
Likes: 371
Liked 129 Times in 59 Posts
|
![]()
Basically, yes, without a roll-bar or -cage you still need to have your rear seat in place.. The bulkhead that the rear cushion attaches to normally serves as the fire-proof barrier for a fuel cell installed in the trunk. The seat itself doesn't effect that function.
__________________
Lew Silverman #2070 "The Wagon Master" N/SA |
![]() |
![]() |
![]() |
#9 |
Member
Join Date: Aug 2002
Location: Florida
Posts: 103
Likes: 79
Liked 12 Times in 6 Posts
|
![]()
Thanks Lew. I did put a firewall in when I changed to a fuel cell in the 66. If I need to I can still get the back seat in.
|
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|