|
08-23-2016, 09:36 PM | #1 |
Junior Member
Join Date: May 2010
Location: Massachusets
Posts: 91
Likes: 0
Liked 2 Times in 1 Post
|
Crank trigger p/u
How can I determine if the crank trigger pickup is going bad? MSD just gives me the ohm range but I did have a bad one last year and it measured with in the spec. I am seeing the same RPM spike on the Racepak graph but this pickup is only a year old. Just want to be sure the spikes are not just noise.
Bob |
08-23-2016, 11:17 PM | #2 |
VIP Member
Join Date: Jun 2006
Posts: 3,371
Likes: 409
Liked 300 Times in 160 Posts
|
Re: Crank trigger p/u
The pick up is either good or bad. 60-90 ohms resistance. Make sure wires are twisted AWAY from any other wiring. Try wrapping the pickup wires in alum foil to act as a shield see if that makes a difference . Has the pickup been hit or damaged in any way? If so replace it. Buy spare carry it all times. Replace pickup yearly cheap insurance ce. FED :&7
|
Thread Tools | |
Display Modes | |
|
|