Attention Robert Garvey

Dusty Lowell · 05-07-2008, 08:50 PM

I am finally getting back to you and others about the problems we had in Gainesville. I tested this afternoon and the problem is FIXED!! Turns out that it was the Thermoquad. The air door was not opening fully and was getting hung up on a plate? that is screwed inside the carb.... in turn making a very rich mixture. Now I am not sure if that happened when we cleaned the carb at Gainesville but there HAD to be something else wrong that we fixed along the way because the car still stumbled with your carb on it. I guess it was just some **** luck down there in FL, lol. I ended up running 11.01 today @118. Thanks to everyone for there great input and help.

05-07-2008, 08:50 PM	#1
Dusty Lowell Member Join Date: Sep 2004 Location: Kensington, NH Posts: 103 Likes: 0 Liked 0 Times in 0 Posts	Attention Robert Garvey I am finally getting back to you and others about the problems we had in Gainesville. I tested this afternoon and the problem is FIXED!! Turns out that it was the Thermoquad. The air door was not opening fully and was getting hung up on a plate? that is screwed inside the carb.... in turn making a very rich mixture. Now I am not sure if that happened when we cleaned the carb at Gainesville but there HAD to be something else wrong that we fixed along the way because the car still stumbled with your carb on it. I guess it was just some **** luck down there in FL, lol. I ended up running 11.01 today @118. Thanks to everyone for there great input and help. __________________ Dusty Lowell #1773 STK F/SA

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode