|
![]() |
#1 |
Junior Member
Join Date: Sep 2004
Location: Chatsworth, CA
Posts: 60
Likes: 1
Liked 16 Times in 2 Posts
|
![]()
Former Nascar Racing Engine. Currently used in NHRA Drag Racing.
Now maintained by Jeff Taylor Performance in Indiana Chevy GM Block MSD Ignition and plug wires Steel Rods New Bullet Racing Camshaft - roller Mikes Racing Heads out of North Carolina that does many championship Nascar and NHRA racing heads Jesel Rocker Arms PAC Triple Valve Springs External Oil Pump and Vacuum Pump HRE Induction aluminum intake manifold (that does many NHRA racing manifolds) Has new valve springs, lifters, keepers, PAC retainers and most parts. Aluminum racing oil pan New valves New Total Seal Rings Comes with an intake manifold top to run one or two carburetors 900 horsepower and 560 torque on dyno with one carb and makes 920 horsepower with 2 carbs This engine can be used for drag racing, street rod, or circle track racing. This engine runs 8.40's in NHRA Drag Racing with 2 carbs and 8.60's with one carb at a car weight of 2900 pounds. The carb, carb regulator and headers are not included. Ready to race besides those items. Flexplate is included. Free truck shipping in the USA. $27,000 |
![]() |
![]() |
![]() |
|
|