Metric T-200 issue

[Rich Biebel]

Metric T-200, reverse valve body. Trans shifts fine 1-2 but 2-3 shift does not shift solid and rpm flares momentarily....once it shifts, 3rd gear is ok

At the moment I don't have a playback tach configured to visibly confirm this and am going by what I hear.

I just raced this car for the first time and it's one I owned back in 2005-2007 and have driven a couple times back in 2011. Never recall having an issue like this.

Don't know who built the trans in the car and does not have E-shift.....

I have to re-check the fluid level but thought it was ok.....

Since it's a reverse shift pattern, it can't be a a shifter cable adjustment issue in my thinking

Any ideas from T-200 users ?

[Signman]

Had this issue with my first 200 changed builders much reduced
Trans builders will know more was told this is something that is inherent.
Would think fluid pressure others will know more.

[Terry Cain]

Originally Posted by Rich Biebel

Metric T-200, reverse valve body. Trans shifts fine 1-2 but 2-3 shift does not shift solid and rpm flares momentarily....once it shifts, 3rd gear is ok

At the moment I don't have a playback tach configured to visibly confirm this and am going by what I hear.

I just raced this car for the first time and it's one I owned back in 2005-2007 and have driven a couple times back in 2011. Never recall having an issue like this.

Don't know who built the trans in the car and does not have E-shift.....

I have to re-check the fluid level but thought it was ok.....

Since it's a reverse shift pattern, it can't be a a shifter cable adjustment issue in my thinking

Any ideas from T-200 users ?

Had an issue like this with a TH350. Seems it was dropping RPM at shift and getting back on converter. Took me several weeks to figure it out.