CLASS RACER FORUM - View Single Post - Wanted

HandOverFist · 03-26-2014, 12:09 PM

Thanks for all the info guys...I have been to all the sites, but no luck yet. Recently enlarged the secondary well orifices from .136 to .146 on several test carbs...unsure how that will scale vs given metering rods. I can get a "CC" rod, but I fear that is going to be just too large a jump to be useful. Was hoping to have one set of rods in the above mentioned range to test in several carbs at my next TNT session.

03-26-2014, 12:09 PM	#8
HandOverFist VIP Member Join Date: Oct 2013 Location: Gulf Breeze, FL Posts: 1,655 Likes: 8 Liked 33 Times in 16 Posts	Re: Wanted - Quadrajet metering rods Thanks for all the info guys...I have been to all the sites, but no luck yet. Recently enlarged the secondary well orifices from .136 to .146 on several test carbs...unsure how that will scale vs given metering rods. I can get a "CC" rod, but I fear that is going to be just too large a jump to be useful. Was hoping to have one set of rods in the above mentioned range to test in several carbs at my next TNT session. __________________ Rich Taylor I/SA - 321