CLASS RACER FORUM - View Single Post

nolongerracing · 10-16-2018, 08:12 PM

If you are using the newer R block that has the lifter valley closed off, you need to provide more drain back to the pan. Also check the oil filter mounting boss. That area is different than the stock blocks and you will need to add an extra cork gasket between the plate or adapter and the block. If you are running the filter plate, make sure it has 6 or 8 holes and not 4 as some plates do.

10-16-2018, 08:12 PM	#10
nolongerracing Member Join Date: Oct 2006 Posts: 164 Likes: 2 Liked 67 Times in 24 Posts	Re: 360 mopar oiling If you are using the newer R block that has the lifter valley closed off, you need to provide more drain back to the pan. Also check the oil filter mounting boss. That area is different than the stock blocks and you will need to add an extra cork gasket between the plate or adapter and the block. If you are running the filter plate, make sure it has 6 or 8 holes and not 4 as some plates do.