View Single Post
Old 12-04-2017, 09:24 PM   #4
FireSale
VIP Member
 
FireSale's Avatar
 
Join Date: Feb 2014
Location: Lakewood Washington
Posts: 1,407
Likes: 29
Liked 236 Times in 127 Posts
Default Re: Spindle question.

The NHRA allowed part is a bit deceiving. This is what the 2017 book says for Stock:

BRAKES
Must be equipped with stock production four-wheel hydraulic
brake system, or aftermarket disc brakes meeting the following
criteria:
1. Minimum effective piston area per wheel: 3 1/2 square inches.
2. Minimum disc (rotor) diameter 10 1/4 inches x 5/16-inch thick.
3. Must install dual master cylinder with any modified brake
system, splitting front and rear into separate systems.
4. Dual calipers on rear wheels permitted, maximum one
hydraulic brake line to dual rear brake system (no wires).
5. Rear wheel line-loc prohibited; front wheel line-loc permitted.
Parking brake optional.
6. Carbon-fiber brake rotors prohibited.
See General Regulations 3:1.

As far as spindles go. Stock.
__________________
Dale Shearon
68 Mustang 6394
FireSale is offline   Reply With Quote