CLASS RACER FORUM - View Single Post

Rod Greene · 11-18-2017, 02:21 PM

Mopar offsets the drive train 1 inch to the right (passenger side). If AMC has the drive train centered that is where the pinion should be. You should measure and set the pinion so there is no side to side angle. The only angle you should have is down. If you haven't spent much on the 8 3/4 I would put a Dana 60 in the car. It is stronger and faster.
Good luck.

11-18-2017, 02:21 PM	#2
Rod Greene Senior Member Join Date: Mar 2002 Location: TN Posts: 514 Likes: 355 Liked 204 Times in 72 Posts	Re: 70 Javelin with mopar 8 3/4 Mopar offsets the drive train 1 inch to the right (passenger side). If AMC has the drive train centered that is where the pinion should be. You should measure and set the pinion so there is no side to side angle. The only angle you should have is down. If you haven't spent much on the 8 3/4 I would put a Dana 60 in the car. It is stronger and faster. Good luck. __________________ Rod Greene Real men shift for them selves. Slowly working on TA Challenger for D,E/S and a 72 Challenger for SS/K, L as if I don't have enough other projects.