Re: Dennis Wydendorf's FGT/M 1990 T-Bird
George made the original one by welding a moroso water pump drive bracket to another piece of steel to locate three bolts off the front of the front cover. I then took that bracket and traced and cut out of a single piece of steel. We plan to make some on a water jet but havn't got around to it yet. The adapter for the front of the water pump to the pulley was machined by me but maybe George can chime in about another source, there is one commercially available.
__________________
ss/gt 93 t-bird
Last edited by dwydendorf; 01-18-2021 at 12:08 PM.
|