CLASS RACER FORUM - View Single Post

Run to Rund · 02-12-2019, 02:41 PM

I would play some more, such as moving .004 vertically and slightly to the side. I was able after some tries to get within .001" out after starting somewhere near where you are now. Be sure you tighten the mounting bolts starting at the bottom ones which are closest to being in line with the crank centerline.

02-12-2019, 02:41 PM	#8
Run to Rund Senior Member Join Date: Sep 2007 Posts: 574 Likes: 6 Liked 44 Times in 22 Posts	Re: Bellhousing alignment I would play some more, such as moving .004 vertically and slightly to the side. I was able after some tries to get within .001" out after starting somewhere near where you are now. Be sure you tighten the mounting bolts starting at the bottom ones which are closest to being in line with the crank centerline.